syringe and needle connection is completely primed. Trapped air can cause inaccurate dispenses and standard priming techniques are not sufficient when using capillary tubing. The glass capillary tubing traps a large volume of liquid that can only be overcome by using the priming kit. The Priming Kit contains one 250 µl Syringe, one 6 pack of 30 gauge needles, and one pack of septa. The 1 mm RN Compression Fitting is designed to attach pulled glass pipettes directly to a small hub RN connection. The RN nut compresses the conical PFA ferrule into the PEEK cup ferrule creating a seal between the syringe barrel and the glass capillary tubing. The connection requires no modifications to the glass capillary tubing. The 1/16 in RN Compression Fitting is designed to attach 1/16 in PEEK tubing directly to a small hub RN connection. Tightening the RN nut compresses the conical PFA ferrule into the PEEK cup ferrule creating a seal between the syringe barrel and the PEEK tubing. The connection requires no modifications to the PEEK tubing. The RN Compression Fittings consist of one large bore RN nut, 5 PFA ferrules and 5 PEEK cup ferrules. They are compatible with 2.5-100 µl RN syringes. The Dual Small Hub RN Coupler is constructed from model 1702 glass with a small hub RN termination on either end. It uses a standard glass size for compatibility with most stereotaxic instrumentation. The coupler is ideal for remotely connecting a syringe to a needle via PEEK tubing. It is also used with the Luer to RN adaptor for connection of custom needles to a 7000 series syringe. The Dual RN Coupler consists of two large bore RN nuts, and one dual RN barrel. The Luer to Small Hub RN Adaptor consists of a Metal Luer Lock Hub and a Small Removable Needle Hub combined in a single needle. The Luer to RN Adaptor and the Dual RN Coupler can be used to connect a 7000 series syringe to any Small Hub Removable Needle or to a Pulled Glass Pipette. The Adaptor creates a rigid connection between the syringe and the needle as well as compatibility with stereotaxic instrumentation. The Luer to RN Adaptor consists of one RN to Luer Needle and a sealing ferrule for a 25 gauge 7000 series needle. temperature engineering thermoplastic that is suitable for a wide range of demanding applications. Designed to withstand high pressure and temperature levels, PEEK Tubing resists even the harshest environmental conditions. Semi-rigid PEEK tubing is insoluble in virtually all organic and inorganic solvents as well as having good dielectric properties. It can be cut to length, accepts pressure fittings and readily stands up to shock, abrasion and impacts. PEEK can be sterilized with Gamma, ETO and is autoclavable. in Wall Thickness, 5 ft in Wall Thickness, 5 ft in Wall Thickness, 5 ft in Wall Thickness, 5 ft in Wall Thickness, 5 ft Tubing |