pump series with flow rates of 0.2 µl/min to 18 ml/min (0.04 to 1100 ml/hr) depending upon the pump and tubing selected. These pumps deliver the accurate low flow rates of syringe pumps without the limits on delivered volume. They are ideal for animal IV infusion, tissue perfusion, and other low-flow laboratory applications. Instech offers this pump with four different motors; choose the motor and tube set that best match your flow rate requirements. In general, use the standard PC5 61-0098 for flows between 0.05 and 1 ml/min, the lower flow PC5 72-4048 for rates between 5 and 100 µl/min, the ultra low flow PC5 72-4049 for rates as low as 0.2 µl/min, and then the higher-flow PC5 72-0001 for rates up to 18 ml/min (1 l/hr). With a given tube set, the pump performs best over a 10:1 flow control range. The pump's analog circuitry has been carefully designed to minimize electromagnetic radiation; for this reason, the pump is often used for tissue perfusion even in the presence of sensitive intracellular recordings. It is also an ideal pump for applications which require limited size or weight, the versatility of single and dual tubes sets and/ or external analog control. An internal 9V lithium battery (supplied with PC5 61-0098, PC5 72-4048 and PC5 72-4049) will run the pump for up to 30 hours, protecting your experiment in the event of a power failure. Due to its power requirements, the high flow version (PC5 72-0001) is not available with battery backup. Battery back-up (30 hrs) Compact pump Minimal electromagnetic radiation An external reference voltage can be used to regulate flow rate and direction (pump direction can only be reversed by analog control). Under external control the speed dials serve as voltage attenuators to limit the external voltage to ±1.25 volts. Tube sets must be purchased separately. Please see our website or contact technical support if you need assistance choosing the right tube set. For use with saline and most drugs, use silicone tubing. For use with solutions containing fats, such as IV diets, use C-FLEX sizes, tube materials and connector types allows you to tailor your peristaltic pump to your particular application. Tube sets typically last about one month under continuous operation. do single channel tube sets, which may shorten the life of your pump's motor. Order # |