PERISTALTIC PUMPS
Harvard Apparatus
phone
508.893.8999
toll free U.S.
800.272.2775
fax
508.429.5732
www.harvardapparatus.com
PERISTALTIC PUMPS
MCP
Pump Drive
72
MCP Pump Drive
This programmable pump drive offers various dispensing modes,
providing highly reproducible and accurate results. Pump head must
be purchased separately. A wide selection of pump heads with single
or multi-channel capabilities are available for the MCP pump drive.
See pages 74 to 78.
Multi-functional Display
For tube sizes, speed, flow-rates, dispensing time, dispensing volume,
interval duration and totally delivered volume as well as operational
mode, flow direction and MAX-key for priming.
Calibration: Dispensing Volume/Flow Rate
Volume and flow rate can be pre-set and calibrated in ml or ml/min.
The drives are pre-calibrated according to the pre-programmed pump
heads and tube sizes.
1
2
3
4
5
6
7
8
Rear panel of MCP
1. Foot Switch/Hand Dis-
penser
2. RS-232 Interface (in)
3. RS-232 Interface (out)
4. Valve Connector
5. Analog Interface
6. Voltage Selector
7. Fuse Holder
8. Mains Supply Socket
All functions of the MCP
drive can be controlled via
PC via the RS-232 interface
KEY FEATURES
Stores 4 programs in memory
Dispensing volumes in ml and flow rates in ml/min
Calibrate in ml/min
Various dispensing modes
(time, volume, interval and flow rate, drip-free)
MAX-key for priming and rapid filling or emptying of
the tube system
APPLICATIONS
Filling of bottles and test tubes
Dispensing of pre-defined volumes
MCP Pump Drive
Specifications
MODEL
MCP pump drive only, pump head must be
purchased separately
SPEED
1 to 240 rpm with 0.1 rpm resolution
BACK PRESSURE
1.5 bar maximum (22 PSI)
MAINS CONNECTION
115 VAC (50/60 Hz) or 230 VAC (50/60 Hz)
POWER CONSUMPTION
100 W maximum
RS-232 INTERFACE
8 PUMPS
Baud rate 9600 or 1200 baud, 8 bit, 1 stop bit,
no parity for complete computer control for cascade
control or up to 8 pumps
ANALOG INTERFACE
Speed control 05 V or 010 V respectively 020 mA
or 420 mA
DIGITAL INPUT
(TTL LEVEL)
Flow direction, start/stop, speed control
VALVE PLUG
1 for 24 V valve
PROTECTION RATING
IP 30
ELECTRO MAGNETIC
IMMUNITY
EN 50082-1
ELECTRO MAGNETIC
RADIATION
EN 55022 Class B
OPERATING CONDITIONS
0° to 40°C (normal environmental conditions)
DIMENSIONS, H x W x D
260 x 155 x 220 mm (10.2 x 6.1 x 8.7 in)
without pump head
WEIGHT
6.4 kg (14.1 lbs)
Order #
Product
PC5 73-3026
MCP Pump Drive, 230 VAC, 50/60 Hz
PC5 73-3029
MCP Pump Drive, 115 VAC, 50/60 Hz
PC5 73-3048
Foot Switch for MCP Pump Drive