Syringe Pump Tuchel) Differential input circuit, input impedance 10 10, 0.4 to 20, 1 to 50, 2 to 100, 4 to 500, 20 to 1,000, 100 to 5,000, 200-10000. Fine Adjustment Through 10-Turn Trimmer selectable b) Through bus connector to PLUGSYS measuring system through links ±10 V pulsatile filtered and mean signal voltage output signal: 30, 100, 300 Hz signal: 0.1, 0.3 Hz a) 0 V output signal with switch in position `0' adjustable with 10-turn trimmer if switch is in position `CAL' can be used to measure arterial blood pressures in all species, even on mice with a high heart rate. It can be used for measurement of arterial pressure in vivo as well as for perfusion pressures in isolated perfused organs such as heart or kidney. It can also be used to measure isovolumetric left ventricular (using a balloon) pressures in isolated hearts from mice up to rabbits or pigs. The transducer consists of a contact plate with cable and the exchangeable transducer head, which can easily be replaced. Contact plates with cables for different amplifier types are available. used to amplify signals from transducers that are based on a resistive Wheatstone bridge. Transducers with a built-in preamplifier can also be connected. The TAM series amplifies the signal to a 0-10 V range making it ideal for use with the CP Pump series, which operates best with a full 0-10 V input range. As they are modular, a power supply case needs to be chosen. Cases are available that hold up to 2, 5, or 10 TAM modules. Choose from two: TAM-A (analog) and TAM-D (digital). The TAM-A is equipped with an analog LED bar graph signal indicator and is best suited for applications which require the monitoring of dynamic signals/phasic waveforms (e.g. blood pressure). The TAM-D has a digital numeric display and is best suited for applications with slowly changing signals, e.g. perfusion pressure, isometric or isotonic contractions, or intracranial pressures. For applications involving the CP Pump, the TAM-D is the appropriate choice. We have a range of transducers that interface directly with the TAM amplifiers. |