48
Harvard Apparatus Stainless Steel Syringes
High Pressure Stainless Steel Syringes
Harvard Apparatus offers a complete line of Stainless Steel Syringes
intended for high pressure applications with good resistance to most
aggressive liquids. Wetted parts are #316 stainless steel or Viton.
Syringes are available in 2.5, 8, 20, 50, 100 and 200 ml sizes with
removable, replaceable tips. Genuine SWAGELOK
®
syringe to tube
fittings are available in 1/16, 1/8 and 1/4 inch sizes. A Luer lock end
fitting is also available. All tips are interchangeable with all syringes
(20 to 200 ml) in the series.
High Pressure 2.5 ml and 8 ml Stainless Steel Syringes
These syringes have been designed to utilize the high forces available
in our syringe pumps to produce pressures up to 7,500 psi and
1,500 psi respectively. These syringes are constructed entirely of
#316 stainless steel. The 2.5 ml stainless steel syringe contains
one Perfluoroelastomer O-Ring seal and one Ball seal. This syringe is
available with a 1/16 inch SWAGELOK
®
tip only. The 8 ml stainless
steel syringe contains two Perfluoroelastomer O-Ring seals and two
PTFE O-Ring seals. This syringe is available with a 1/16 inch or 1/8
inch SWAGELOK
®
tip.
High Pressure 20 ml to 200 ml Stainless Steel Syringes
Both syringe barrel end plungers are #316 stainless steel. A Viton
O-Ring between top and end of t he barrel insures against leakage.
Syringes are guaranteed to be leak free for pressures up to 750 psi.
All syringes are supplied with inside diameter dimensions for use with
Harvard Apparatus microprocessor controlled pumps and rate charts for use
with older `classic' pumps. Replacement Viton O-Rings are available, as are
the more chemically resistant Perfluoroelastomer O-Rings.
For illustration and syringe dimensions, see next page.
Harvard Apparatus High Pressure Stainless Steel Syringes
8 ml
100 ml
50 ml
20 ml
2.5 ml
KEY FEATURES
7500 psi peak pressure (with 2.5 ml syringes)
Fits most Harvard Apparatus pumps
Electron beam welded
Fully autoclavable
1/16 inch SWAGELOK
®
fitting for low dead volume
Order #
Product
Replacement Parts
Chemraz 505
PC5 5013-087
Perfluoroelastomer Barrel O-Ring 8 ml
PC5 5013-089
Perfluoroelastomer Barrel O-Ring 20 ml
PC5 5013-090
Perfluoroelastomer Barrel O-Ring 50 ml
PC5 5013-091
Perfluoroelastomer Barrel O-Ring 100 ml
PC5 5013-092
Perfluoroelastomer Barrel O-Ring 200 ml
PC5 5013-110* Perfluoroelastomer Tip Seal O-Ring 2.5 ml and 8 ml
PC5 5013-109
Perfluoroelastomer Tip Seal O-Ring 20 ml to 200 ml
Viton
PC5 72-2472
Replacement Viton O-Ring 20 ml, pkg. of 10
PC5 72-2473
Replacement Viton O-Ring 50 ml, pkg. of 10
PC5 72-2474
Replacement Viton O-Ring 100 ml, pkg. of 10
PC5 72-2475
Replacement Viton O-Ring 200 ml, pkg. of 10
PC5 72-2616
Replacement Viton Tip Seal O-Ring, 20 ml to 200 ml, pkg. of 20
Other
PC5 70-2271
Replacement Ball Seal for 2.5 ml
PC5 5013-088
Replacement Backup PTFE O-Ring, 8 ml
PC5 72-2617
Stainless Steel Plunger Button to Adapt Syringe for Use with
PHD ULTRA HPSI/XF, see page 26
(Required for 50 and 100 ml Syringes Only)
*Note: 2.5 ml and 8 ml stainless steel syringes cannot be used with the PHD ULTRA
HPSI/XF due to overpressure conditions.
High Pressure Stainless Steel Syringes
With SWAGELOK
®
With Luer Lock
SYRINGE SIZE
THREAD
DIAMETER 1/16 INCH
DIAMETER 1/8 INCH
DIAMETER 1/4 INCH
2.5 ml
1/4 - 28 inch
PC5 70-2269
N/A
N/A
N/A
8 ml
1/4 - 28 inch
PC5 70-2267
PC5 70-2268
N/A
N/A
20 ml
3/8 - 24 inch
PC5 70-2251
PC5 70-2252
PC5 70-2253
PC5 70-2254
50 ml
3/8 - 24 inch
PC5 70-2255
PC5 70-2256
PC5 70-2257
PC5 70-2258
100 ml
3/8 - 24 inch
PC5 70-2259
PC5 70-2260
PC5 70-2261
PC5 70-2262
200 ml
3/8 - 24 inch
PC5 70-2263
PC5 70-2264
PC5 70-2265
PC5 70-2266
Replacement Tips, Furnished with Sealing O-Ring
2.5 ml
N/A
PC5 70-2246
N/A
N/A
N/A
8 ml
N/A
PC5 70-2246
PC5 70-2245
N/A
N/A
20 to 200 ml
N/A
PC5 70-2247
PC5 70-2248
PC5 70-2249
PC5 70-2250
Harvard Apparatus
phone
508.893.8999
toll free U.S.
800.272.2775
fax
508.429.5732
www.harvardapparatus.com
SYRINGES
SYRINGES
Harvard Apparatus Stainless Steel Syringes
200 ml