Harvard Apparatus
phone
508.893.8999
toll free U.S.
800.272.2775
fax
508.429.5732
www.harvardapparatus.com
37
Pump 11 Elite OEM Module
Specifications
TYPE
Microprocessor dual syringe, infusion/withdrawal
ACCURACY
±0.5% (Pump 11 Elite)
±0.35% (Pico Plus Elite)
REPRODUCIBILITY
±0.5%
SYRINGE TYPE
Plastic or glass
SYRINGE SIZE
Minimum
0.5 µl
Maximum
60 ml (10 ml dual)
FLOW RATE:
Minimum
1.28 pl/min (Pump 11 Elite)
0.54 pl/min
(Pico Plus Elite)
Maximum
88.28 ml/min (Pump 11 Elite Single Syringe Version)
26.02 ml/min (Pump 11 Elite Dual Syringe Version)
39.77 ml/min (Pico Plus Elite Single Syringe Version)
11.70 ml/min (Pico Plus Elite Dual Syringe Version)
AVERAGE LINEAR FORCE
16 kg (35 lbs) at 100% force selection
CONNECTORS:
RS-485 IEEE-1394, 6 position
USB
Type B
I/O & TTL
15-pin D-Sub Connector
OVERALL DIMENSIONS,
H X W X D
16.25 x 24.1 x 10.8 cm (6.5 x 9.5 x 4.25 in)
WEIGHT
2.7 kg (6 lbs)
REGULATORY
CERTIFICATIONS
CE, ETL (UL, CSA), WEEE, EU RoHS & CB Scheme
KEY FEATURES
Accuracy of ±0.35% or ±0.5%
Footprint of 16.25 x 24.1 x 10.8 cm (6.5 x 9.5 x 4.25 in)
1.28 pl/min to 88.28 ml/min
CE, ETL (UL, CSA), WEEE, EU RoHS & CB Scheme
Order #
Product
PC5 70-4800
Pump 11 Elite OEM Module (Single Syringe)
PC5 70-4801
Pump 11 Elite OEM Module (Dual Syringe)
PC5 70-4802
Pico Plus Elite OEM Module (Dual Syringe)
PC5 70-4803
Pico Plus Elite OEM Module (Single Syringe)
· All of our OEM modules are based upon our proven digital syringe
pump technology delivering the same accuracy and reproducibility as
our stand alone pumps.
· The modules consist of 3 basic components a drive mechanism
assembly, a motor assembly, and a circuit board assembly. In
standard configurations, all are mounted to a base plate. These
sub-assemblies can be purchased individually if required.
· All units have the ability to run in either direction (infuse/withdraw)
at separate rates and target volumes.
· Although computer control is most commonly used for communication,
a voltage level control for start/stop and change of direction is available.
Our newer PHD ULTRA
TM
and Pump 11 Elite based modules can be rate
controlled using an external DC 0-10 volt signal.
· All systems will accept input voltages over the range of 12-30 volts DC.
· Modification to accommodate existing designs or future designs
is available.
· Modules can be linked together in a daisy chain fashion for complete
computer control of up to 16 separate pumps at once. The PHD
ULTRA
TM
based versions can control up to 99 pumps simultaneously.
· Our newest model, based upon our new PHD ULTRA
TM
syringe pump
design, incorporates a stable mechanism, has an extended pushing
block, larger guide rods, and easily adjustable capturing brackets
and limit stops which fully protect the syringe and prevent siphoning.
Models with either 75 or 200 pounds of adjustable force are
available. These also offer a more enhanced I/O control and a USB
serial port.
· We can configure our modules to support directional control valves,
heating and cooling devices, custom syringes, and more.
General Features and Capabilities
Pump 11 Elite/Pico Plus Elite
OEM Module
Customized Solutions - OEM and Special Syringe Pumps
SYRINGE PUMPS
SYRINGE PUMPS
OEM and Special Syringe Pumps