Transducers for Oxipod Animal Use Only
The MLT323 Animal Clip and MLT324 Tail Wrap Pulse Oximetry Transducers are used to measure blood oxygen saturation (SpO²) in well vascularized tissue of an animal such as paw pad or tail. Quick and easy to apply, these transducers are ideal for spot checking and short-term continuous monitoring of SpO². They are both suitable for use with the ML320 Oximeter Pod.
The MLT323 Animal Clip and MLT324 Tail Wrap Pulse Oximetry Transducers are used to measure blood oxygen saturation (SpO²) in well vascularized tissue of an animal such as paw pad or tail. Quick and easy to apply, these transducers are ideal for spot checking and short-term continuous monitoring of SpO². They are both suitable for use with the ML320 Oximeter Pod.
Operation:
The transducers connect to the 9 pin D-type connector at the rear of the Oximeter Pod. Short pulses of light at two different frequencies are transmitted through the tissue from light emitting diodes in the transducer. The intensity of the transmitted light is measured and the ML320 Oximeter Pod produces a signal scaled to read in % SpO².
Application:
Designed for applications where little transducer motion is expected. The MLT323 SpO² Animal Clip is suitable for tongue applications or paw pad and well vascularized areas as appropriate. The MLT324 SpO²Tail Wrap is suitable for use on the toe (dog, large animal) or base of the tail (small animal).
| Specifications | 77-0085 | 77-0084 |
|---|---|---|
| Accuracy | (70-100% saturation): Dependent on hemoglobin type and sensor location. | (70-100% saturation): Dependent on hemoglobin type and sensor location. |
| Amplification Input Amplifier | See product page for complete specifications | See product page for complete specifications |
| Cable Length English | 3.3 ft | 3.3 ft |
| Cable Length Metric | 1 m | 1 m |
| Connector | 9 pin D-type | 9 pin D-type |
| Measurement Wavelength | Red (660 nm), Infrared (910 nm) | Red (660 nm), Infrared (910 nm) |
| Model | MLT324 | MLT323 |
| Operating Principle | Non-invasive blood oxygen saturation (SpO₂) determination using red and infrared light passing through pulsating blood in vascular tissue. | Non-invasive blood oxygen saturation (SpO₂) determination using red and infrared light passing through pulsating blood in vascular tissue. |
| Package | 1 | 1 |
| Product Family | Data Acquisition | Data Acquisition |
| Saturation Range | 70 to 100 % | 70 to 100 % |
