PLUGSYS Case Type 603
Case Type 603 is a 19-inch rack housing and has 20 positions (slot units) to accept PLUGSYS modules. An additional power supply (73-1529) is also available, necessary only for some modules.
These basic system cases with internal system bus are supplied completely wired and ready for use.
The basic system cases with internal system bus are supplied completely wired and ready for use. The Type 603 cases provides a total space of 20 positions (slot units) to accept PLUGSYS modules. An additional 24 V power supply (73-1529) is also available, necessary only for some modules.
The width of the actual PLUGSYS modules equals either one or a multiple of slot units. For instance, the width of the Transducer Amplifier Module TAM-A is equal to two slot units, therefore it would occupy two slot spaces in the PLUGSYS case. The maximum number of PLUGSYS modules — such as a Transdcuer Amplifier Module, ECG Amplifier Module, Transit Time Flowmeter Module etc. — which can be plugged into a unit system case depends on the number of slot units required by each module.
| Specifications | 73-0045 |
|---|---|
| Accessories | Line Cable, Spare Fuses, Screw driver for fitting Function Modules, Document Folder for Operating Instructions of Function Modules, 3 x BNC-BNC Output lines |
| Dimensions (H x W x D) English | 5.2 x 19 x 17.1 in |
| Dimensions (H x W x D) Metric | 132 x 483 x 435 mm |
| Housing Construction | Metallic housing, gray plastic coated, Universal 19 inch case with pivoting feet, prepared for rack mounting |
| Module Positions | 20 slot units max. |
| Power Supply | 100 to 240 VAC, 50/60 Hz, built-in line filter, 100 W max. consumption |
| Socket Combination | 3-pin IEC mains with fuse and mains switch on back of housing |
| Weight (English) | 14.3 lbs |
| Weight (Metric) | 6.5 kg |
