HSE Data Acquisition Hardware
Choose from one of three available data acquisition hardware interfaces. The stand-alone version (73-3330) is ideal for applications that require collection of data from both PLUGSYS modules or third party analog output devices. The PLUGSYS 8 (73-4817) or 16 (73-4818) channel hardware interfaces are convenient compact data acquisition hardware interfaces for the PLUGSYS amplifier cases.
To ensure that your system is properly configured as a complete setup that meets your experimental needs, please contact us. In Europe, please call +49 7665 92000 or email firstname.lastname@example.org; In the US email us at email@example.com or call us at 800-597-0580.
Central connection for output signals of PLUGSYS modules to data acquisition board
73-4817 USB-C PLUGSYS module has an 8-channel A/D converter on board. Amplifiers are in the housing internally connected to the A/D channels. Output to computer is USB.
73-4818 USB-C PLUGSYS module has a16-channel A/D converter on board. Amplifiers are in the housing internally connected to the A/D channels. Output to computer is USB.
To connect input signals from any instrument with analog output to a computer or laptop via an USB port for using HA-HSE software
Consists of a 16-channel USB A/D converter box with BNC inputs and one USB cable. Up to 16 input signals can be connected to the USB Input Box from the PLUGSYS system case or independent manufacturers via BNC cables. The USB Input Box is connected to a standard USB 2.0 port on thedesktop or laptop computer.
Consists of a 16-channel USB A/D converter box with BNC inputs and one USB cable.