OxyletPro System - Treadmill (Panlab)
Price on Request
SKU
plbgpd9
Complete solution for assessing respiratory metabolism in treadmill studies using the indirect calorimetry method.
- New touchcsreen treadmill unit
- Rolling belts with adjustable speed and slope
- Minimum maintenance required
- Easy to clean
- High performance motor
- Silent operation, even at high regimes
- Accurate control of the intensity of the shock delivered
- Positive and negative slope (-25 to +25 degrees)
- Indirect calorimetry measurement for VOmax determination
The OxyletPro system is a modular system allowing the integration of respiratory metabolism (O2 consumption /CO2 production). Panlab provides a complete Oxylet solution enabling forced exercise training in a treadmill combined with indirect calorimetry in rodents.
Basically, Panlab Treadmill apparatus consists of a rolling belt with adjustable speed (up to 150 cm/s) and slope (from -25 to 25 degrees) and a control Unit. The rolling belt is built with especially selected materials to guarantee the best performance under conditions of intensive use and the minimum operations of maintenance, as well as simplicity in keeping it clean. The lanes (corridors of activity for the animal) have sufficient width for the subject to correct its errors in coordination, thereby allowing an exact measurement of the fatigue without deficiencies in motor coordination.
The treadmill unit controls the speed of the belt, shows measured data in its touchscreen display and provides electrical shock to the grid. The electrical shock supplied by the grid is of constant intensity (from 0 to 2 mA), that is, the current which circulates through the animal (and therefore its effect) only depends on the value of the mA chosen and not of the subject (quantity of body mass in contact with the bars, perspiration, etc.)
For metabolism studies, the treadmill is provided with an air isolated enclosure. The air flow control unit allows a fine regulation of the air flow inside the treadmill and sends the air to the gas analyzer for O2/CO2 gas concentrations determination. The air melange is previously stabilized through the air reservoir.
The associated METABOLISM software transfers the data from the treadmill control unit and the gas analyzer to a PC computer using RS232/USB outputs for data storage and further analysis.
NOTE: the calibration tanks are not provided with the system and should be purchased separately by the user (see Specifications).
Basically, Panlab Treadmill apparatus consists of a rolling belt with adjustable speed (up to 150 cm/s) and slope (from -25 to 25 degrees) and a control Unit. The rolling belt is built with especially selected materials to guarantee the best performance under conditions of intensive use and the minimum operations of maintenance, as well as simplicity in keeping it clean. The lanes (corridors of activity for the animal) have sufficient width for the subject to correct its errors in coordination, thereby allowing an exact measurement of the fatigue without deficiencies in motor coordination.
The treadmill unit controls the speed of the belt, shows measured data in its touchscreen display and provides electrical shock to the grid. The electrical shock supplied by the grid is of constant intensity (from 0 to 2 mA), that is, the current which circulates through the animal (and therefore its effect) only depends on the value of the mA chosen and not of the subject (quantity of body mass in contact with the bars, perspiration, etc.)
For metabolism studies, the treadmill is provided with an air isolated enclosure. The air flow control unit allows a fine regulation of the air flow inside the treadmill and sends the air to the gas analyzer for O2/CO2 gas concentrations determination. The air melange is previously stabilized through the air reservoir.
The associated METABOLISM software transfers the data from the treadmill control unit and the gas analyzer to a PC computer using RS232/USB outputs for data storage and further analysis.
NOTE: the calibration tanks are not provided with the system and should be purchased separately by the user (see Specifications).
| Specifications | 76-0891 |
|---|---|
| Model | LE8708TS |
| Subjects | One (1) Mouse |
| Speed cm (inch) | 5 to 150 (2 to 59) |
| Exercise Area cm (inch) | 38 x 5 x 5 (15 x 2 x 2) |
| Control Unit Dimensions cm (inch) | 23 x 29.5 x 11 (9 x 11.6 x 4.3) |
| Treadmill Dimensions (without lid) cm (inch) | 44 x 15 x 23 (17 x 6 x 9) |
| Supporting Base /Foot Surface cm (inch) | 22 x 13 (9 x 5) |
| Options | 76-0554 Standard Lid, 76-0678 OxyletPro Lid, 76-0921 Air Puff |
