UI Ultra-Microliter Injection System

UI Ultra-Microliter Injection System

The UI Ultra-Microliter Injection System is a unique tool for the controlled injection of small cells or drugs into either soft tissue or large cells.

  • Stem cell injection
  • Drug delivery
  • Nerve injury and regeneration
  • Muscle fibers
  • Large cell microinjection
  • Easy to use

Item# Description U.S. List Price Quantity
64-1929 (UI-40) Ultra Inject for 26 Gauge Needle, 40 micron tip
64-1930 (UI-60) Ultra Inject for 26 Gauge Needle, 60 micron tip
64-1931 (UI-80) Ultra Inject for 26 Gauge Needle, 80 micron tip
70-3601 PHD Ultra Nanomite Infusion/Withdrawal Programmable
Login for U.S. Pricing

The UI Ultra-Microliter Injection System is a unique tool for the controlled injection of small cells or drugs into either soft tissue or large cells. The UI micropipette has a specially designed glass tip that easily attaches to any Hamilton syringe for microinjection of experimental fluids.

The UI micropipette features a beveled tip for minimal tissue injury, direct and simple setup, and no dead volume during application. The UI is available in tip sizes of 40, 60, and 80 microns to facilitate injection of a range of sample sizes.

Attachment to any Hamilton syringe having a 26 GA needle is straightforward: Insert the syringe needle into the pipette until it stops and you're ready for secure, leak-free delivery.

Optionally, delivery volume can be well controlled using Harvard Apparatus'
Nanomite programmable syringe pump. Specifically, the pump head
can be mounted to a micromanipulator for precision injection, or hand held
for manual injection.

ClassificationClass I
Dimensions Control Box LxDxH in cm12 x 8.5 x 4.38 (30.5 x 21.6 x 11.1)
Dimensions Mechanism LxDxH in cm2.5 x 2.0 x 7.5 (6.35 x 5.08 x 19.05)
Display4.3" WQVGA TFT Color Display with Touchpad
Drive Motor1.8° Stepper Motor
Environmental Humidity20% to 80% RH, non condensing
Environmental Operating Temperature English40°F to 104°F
Environmental Operating Temperature Metric4°C to 40°C
Environmental Storage Temperatue English14°F to 158°F
Environmental Storage Temperatue Metric-10°C to 70°C
Flow Rate Maximum367.4 pl/min using 50 µl syringe
Flow Rate Minimum1.906 ml/min using 500 µl syringe
I O TTL Connectors15 pin D-Sub Connector
Input Power75 W, 0.5 A fuse
Installation CategoryII
Max Linear Force11 lbs @ 100% Force Selection
Mode of OperationContinuous
Motor Drive ControlMicroprocessor with 1/16 microstepping
Net Weight Control Box English4.55 lb
Net Weight Control Box Metric2.06 kg
Net Weight Remote Mechanism English1.01 lb
Net Weight Remote Mechanism Metric0.458 kg
No of Syringes1
Non Volatile MemoryStorage of all settings
Number of Microsteps per one rev of Lead Screw3,200
Pollution Degree1
Pump ConfigurationRemote
Pump FunctionInfuse/Withdraw, Programmable
Pusher Travel Rate Maximum228.97 mm/min
Pusher Travel Rate Minimum0.433 µm/min
RS 232 Connectors9 pin D-Sub Connector
Regulatory CertificationsCE, ETL (UL, CSA), WEE, EU RoHS & CB Scheme
Step Rate Maximum52 µsec/µstep
Step Rate Minimum27.5 sec/µstep
Syringe Rack TypeStandard Rack
Syringe Size Maximum500 µl
Syringe Size Minimum50 µl
USB ConnectorsType B
Voltage Range100-240 VAC, 50/60 Hz
Tip diameter 40-80 microns beveled
Material Borosilicate glass
O.D. 1.5 mm
Length 43 mm
Seal size Designed for use with 26 gauge Hamilton syringe needle
Non sterile Recommended sterilization method is ethylene oxide gas
UI60 Ultra Inject data sheet.pdfUI60 Ultra-Microliter Injection System Data Sheet