Tee Connector
Used to mount clamps and adapters that have a male connector to vertical lattice rod. One end has an open side that will clamp on a rod up to 13 mm (1/2 in) in diameter. The other end has a female socket 19 mm (3/4 in) deep that will take a male connector, or the butt end of a rod, up to 13 mm (1/2 in).
Used to mount clamps and adapters that have a male connector to vertical lattice rod. One end of the Stronghold tee connector has an open side that will clamp on a rod up to 13 mm (1/2 in) in diameter. The other end has a female socket 19 mm (3/4 in) deep that will take a male connector, or the butt end of a rod, up to 13 mm (1/2 in).
- Precision injection molded nylon with 30% glass fiber reinforcement provides enormous strength at a great saving in weight.
- There is absolutely no corrosion possible.
- High melting point of 221°C
- Good resistance to chemicals, salt solutions and most solvents.
About Harvard Apparatus Stronghold Products
This innovative, flexible, and totally integrated group of clamps, connectors and lattices meets many laboratory requirements. The nylon and glass fiber injection molding process creates an extremely strong corrosion free line of products. The high melting point of 221°C and chemical resistance makes these products the perfect material for lab settings.
Select suffix –R for a red body with white thumb screws and –W for a white body with red thumb screws.
Specifications | 53-2032W | 53-2032R |
---|---|---|
Accepts Mounting Rod Diameter | 0 to 13 mm (0 to 0.5 in) | 0 to 13 mm (0 to 0.5 in) |
Clamping Range | 0 to 13 mm (0 to 0.5 in) | 0 to 13 mm (0 to 0.5 in) |
Color | White | Red |
Socket Depth | 19 mm (0.75 in) | 19 mm (0.75 in) |
Melting Point | 221°C | 221°C |