Sterile Single Use Wide Range Pressure Sensors
Small-scale in-line sterile pressure sensors suitable for a variety of applications, i.e. in vivo, ex vivo, in situ and regenerative organ and cellular applications.
- Male/Female Luer lock with port cover for female Luer lock end for dead-end applications
- In-line pressure transducers for low flow rates when used with 1⁄8-in or 1⁄16-in barbed connectors
- May be paired with adapter Tee-connectors, 1⁄4-in or 3⁄8-in barbed connectors, for non-in-line applications
These are small-scale in-line sterile pressure sensors suitable for a variety of applications, i.e. in vivo, ex vivo, in situ and regenerative organ and cellular applications.
- Male/Female Luer lock with port cover for female Luer lock end for dead-end applications
- In-line pressure transducers for low flow rates when used with 1⁄8-in or 1⁄16-in barbed connectors
- May be paired with adapter Tee-connectors, 1⁄4-in or 3⁄8-in barbed connectors, for non-in-line applications
Accuracy | Better than ±2% of reading in the range of 0 to 6 psi (0 to 0.41 bar or 0 to 310 mmHg) |
Better than ±3% of reading in the range of 6 to 30 psi (0.41 to 2.07 bar) |
|
In range of 30 to 60 psi (2.07 to 4.14 bar) typically better than ±5% of reading |
|
Pressure Range | -7 to +75 psi (-0.48 to +5.2 bar) |
Biocompatibility | All materials in contact with product fluid path meet USP Class VI requirements |
Manufacturing Environment | FDA Registered ISO 13485-certified facility; Class 100,000 clean room |
Gamma Irradiation | Up to 50 kGy |
Operating Temperature | 15 to 40°C (other ranges with process qualification) |
Storage Temperature | -25° to 65°C |
Input/Output Impedence | 270 to 4,000 Ω |
Excitation Voltage | 2.5 to 10 VDC |
Sensor Output | 0.2584 mV/psi/Volt |
Connector | Custom molded water-tight 4 pin connector; signal ± and excitation ± |