Series 40 High Profile Microincubation Imaging Chambers
Price on Request
Series 40 High Profile Microincubation Imaging Chambers
• O-ring seals permit quick exchange of coverslips
• Anodized aluminum base ensures good heat transfer
• Open and closed bath designs
• Use standard #1 or #1.5 thickness coverslips
• Ideal for rapid screening assays
The RC-40HP uses 25 mm coverslips to form the chamber bottom. Tapered 6.5 mm interior sides provide clearance for pipettes, injectors, etc. and allow for a greater bath depth than the 40LP Series.
The RC-40HP Chamber is supplied with one package of #1.5 coverslips, 25 mm diameter.
The RC-43C is the closed bath member of the Series 40 family. The closed bath promotes an even and continuous solution exchange and eliminates changes in focus due to alterations in bath height. Studies involving physiological bicarbonate buffers can be performed with no gas loss at the chamber interface.
Fluid is delivered to a 20 gauge stainless steel perfusion inlet port and removed from the chamber by means of a similar outlet port. The top coverslip is held in place with a retainer; a thin coating of silicone grease forms the seal. The distance between top and bottom coverslips is 1 mm.
The RC-43C Chamber is supplied with one package each of #1.5 coverslips (25 and 18 mm round, respectively) and spare O-rings. Additionally, the RC-43C is supplied with 10 feet of PE-160 and PE-90 Polyethylene Tubing.
• Anodized aluminum base ensures good heat transfer
• Open and closed bath designs
• Use standard #1 or #1.5 thickness coverslips
• Ideal for rapid screening assays
The RC-40HP uses 25 mm coverslips to form the chamber bottom. Tapered 6.5 mm interior sides provide clearance for pipettes, injectors, etc. and allow for a greater bath depth than the 40LP Series.
The RC-40HP Chamber is supplied with one package of #1.5 coverslips, 25 mm diameter.
The RC-43C is the closed bath member of the Series 40 family. The closed bath promotes an even and continuous solution exchange and eliminates changes in focus due to alterations in bath height. Studies involving physiological bicarbonate buffers can be performed with no gas loss at the chamber interface.
Fluid is delivered to a 20 gauge stainless steel perfusion inlet port and removed from the chamber by means of a similar outlet port. The top coverslip is held in place with a retainer; a thin coating of silicone grease forms the seal. The distance between top and bottom coverslips is 1 mm.
The RC-43C Chamber is supplied with one package each of #1.5 coverslips (25 and 18 mm round, respectively) and spare O-rings. Additionally, the RC-43C is supplied with 10 feet of PE-160 and PE-90 Polyethylene Tubing.