PLUGSYS Recording Output Standard Set (ROM, ROM-A, ROM-C)
The Recording Output Standard Set is ideal for connecting a chart recorder or digital data acquisition unit to the PLUGSYS measuring system. It reduces the number of connecting wires and allows a clear connection to any chart recorder or data acquisition system.
The Standard Set (73-0166) includes:
73-1684 ROM-A: adjustable amplifier module that buffers all 16 internal analog lines AV1 to AV16. It is internally connected to the central output connector module. It is internally connected to the central output connector module ROM-C and has to be installed into the PLUGSYS rack from the front. ROM-A is an attenuator for the internal analogue lines AV1 to AV16. Each channel individually adjustable from 0 to ±10 volt for optimum matching with the recording unit.
73-1639 ROM-C: central output connector 36 pin ribbon type. All outputs have EMI filters to reduce the electromagnetic interference from and to the PLUGSYS measuring system. It can be installed either in the front or at the rear if there is not sufficient module space on the front.
73-1685 BNC Connection Block: external box with 17 BNC sockets for the 16 analogue lines AV1 to AV16 with additional EMI filters and ESD protection circuit. The maximal cable length between the PLUGSYS and the BNC connector block is nominal 3 m. As a further combination it is possible to use the slave output of the BNC connector block to connect up an additional evaluation and recording unit.
If the connected system chart recorder or data acquisition system can handle the output voltages of ±10 Volt, adjustment for each channel individually from 0 to ±10 Volt is not required. In this case the ROM-DL can be substituted for the ROM-A module, and the ROM-C with the BNC connector box can be connected to the ROM-DL and installed either in the front or at the rear of the PLUGSYS system case if there is not sufficient module space on the front.
ROM-A
Inputs | Direct from PLUGSYS system bus, all 16 analogue lines AV1 to AV16 and MUX line |
Amplitude | Individually adjustable in the range from 0 to ±10 V |
Outputs | Ribbon cable connector for connecting internally the ROM-C |
Dimensions, H x W x D | 127.5 x 20.2 x 220 mm (5 x 0.8 x 8.7 in) |
PLUGSYS Width | 1 slot unit |
Weight | 80 g (2.8 oz) |
ROM-C
Construction | Output module for ROM-A or ROM-DL connected over ribbon cable to ROM-A or DL |
Outputs | All AV signals and MUX output centrally through 36-pin ribbon output socket (e.g., CONEC Type CRS 36 LG (301A10269x)); MUX output is additionally taken to BNC socket |
Output Filter | EMC filter for suppressing radiated interference or interference pick-up |
Dimensions, H x W x D | 127.5 x 20.2 x 65 mm (5 x 0.8 x 2.6 in) |
PLUGSYS Width | 1 slot unit |
Weight | 80 g (2.8 oz) |
Included | Fixing screws, operating instructions, connecting cable ROM-C to ROM-A or ROM-DL |
Add-On | One or two ROM-B modules, BNC connector options block |
BNC Connector Block
Construction | Natural anodized aluminium case with 36-pin ribbon input and slave output socket (e.g., CONEC Type CRS36 LG (301A 10269x)). All PLUGSYS 16 analog outputs AV1 to AV16 and MUX-OUT available for individual connection via BNC sockets |
Output Filter | EMC filter for suppressing radiated interference or interference pick-up and ESD protection circuit |
Dimensions, H x W x D | 55 x 105 x 245 mm (2.2 x 4.1 x 9.6 in) |
Weight | 0.8 kg (1.7 lb) |
Add-On | Customized cable for connecting slave output to data acquisition board |
Recording Output Standard Set
Included | Operating instructions, 5 BNC cables, connecting cable ROM-A to ROM-C (ribbon), connecting cable ROM-C to BNC connector block |