PLUGSYS Case Type 601
Case Type 601 has 10 slot units for PLUGSYS modules. Most modules occupy two slots.
Note: 601 Case is shown here with four of the Transducer Amplifier Modules TAM-A (73-0065) and one ECG Amplifier module ECGA (73-0149).
The basic system cases with internal system bus are supplied completely wired and ready for use. The Type 601 cases provides a total space of 10 positions (slot units) to accept PLUGSYS modules. An additional 24 V power supply (73-3103) is also available, necessary only for some modules.
The width of the actual PLUGSYS modules equals either one or a multiple of slot units. For instance, the width of the Transducer Amplifier Module TAM-A is equal to two slot units, therefore it would occupy 2 slot spaces in the PLUGSYS case. The maximum number of PLUGSYS modules — such as a Transdcuer Amplifier Module, ECG Amplifier Module, Transit Time Flowmeter Module etc.— which can be plugged into a unit system case depends on the number of slot units required by each module.
| Specifications | 73-1521 | 73-3103 |
|---|---|---|
| Accessories | Line Cable, Screw driver for fitting Function Modules, Document Folder for Operating Instructions of Function Modules, 3 x BNC-BNC Output lines | |
| Dimensions (H x W x D) English | 5.9 x 9.25 x 16.5 in | |
| Dimensions (H x W x D) Metric | 150 x 235 x 420 mm | |
| Housing Construction | Metallic housing, gray plastic coated with pivoting feet | |
| Module Positions | 10 slot units max. | |
| Power Supply | 85 to 264 VAC (40 Watts), output voltage +5 VDC (5 A) and | |
| Socket Combination | 3-pin IEC mains with fuse and mains switch on back of housing | |
| Weight (English) | 10.6 lbs without PLUGSYS modules | |
| Weight (Metric) | 4.8 kg without PLUGSYS modules |
