MCP Pump Drive
Dispense by speed (rpm), volume (ml), time (0.1 seconds to 999 hours), flow rate (ml/min) or interval. This programmable pump drive offers various dispensing modes, providing highly reproducible and accurate results.
This programmable pump drive offers various dispensing modes, providing highly reproducible and accurate results. A wide selection of pump heads with single or multi-channel capabilities are available for the MCP pump drive. Different pump heads are also available.
Features
- Microprocessor controlled, digital drive stores 4 programs in memory
- Flow-rates of the pump-heads are pre-programmed according to the different standard tubing sizes
- Dispensing volumes in ml and flow rates in ml/min
- Calibrate in ml/min
- Various dispensing modes (time, volume, interval and flow rate, drip-free)
- MAX-key for priming and rapid filling or emptying of the tube system.
- Dispense by speed (rpm), volume (ml), time (0.1 seconds to 999 hours), flow rate (ml/min) or interval
Applications
- Filling of bottles and test tubes as well as dispensing of pre-defined volumes.
- All functions of the MCP drive can be controlled via PC via the RS-232 interface.
Multi-Functional Display
For tube sizes, speed, flow-rates, dispensing time, dispensing volume, interval duration and totally delivered volume as well as operational mode, flow direction and MAX-key for priming.
Calibratable: Dispensing Volume/Flow Rate
Volume and flow-rate can be pre-set and calibrated in ml or ml/min. The drives are pre-calibrated according to the pre-programmed pump-heads and tube sizes.
| Specifications | 73-3029 | 73-3026 |
|---|---|---|
| Analog Interface | Speed control 0 to 5 V or 0 to 10 V respectively 0 to 20 mA or 4 to 20 mA | Speed control 0 to 5 V or 0 to10 V respectively 0 to 20 mA or 4 to 20 mA |
| Back Pressure, Max | 1.5 bar (22 PSI) | 1.5 bar (22 PSI) |
| Dimensions (H x W x D) | 10.2 x 6.1 x 8.7 in (26.0 x 15.5 x 22.0 cm) | 10.2 x 6.1 x 8.7 in (26.0 x 15.5 x 22.0 cm) |
| Display Input (TTL Level) | Flow direction, start/stop, speed control | Flow direction, start/stop, speed control |
| Electro Magnetic Immunity | EN 50082-1 | EN 50082-1 |
| Electro Magnetic Radiation | EN 55022 Class B | EN 55022 Class B |
| Mains Connection | 115 VAC, 60 Hz or 230 VAC, 50 Hz | 115 VAC, 60 Hz or 230 VAC, 50 Hz |
| Operating Conditions | 0°C to 40°C (normal environmental conditions) | 0° to 40°C (normal environmental conditions) |
| Power Consumption | 100 W maximum | 100 W maximum |
| Protection Rating | IP 30 | IP 30 |
| RS-232 Interface | Baud rate 9600 baud, 8 bit, no parity for operation controlling via PC, additional RS-232 output for cascade control or up to 8 pumps | Baud rate 9600 baud, 8 bit, no parity for operation controlling via PC, additional RS-232 output for cascade control or up to 8 pumps |
| Series | MCP Pump Drive only, pump head must be purchased separately | MCP Pump Drive only, pump head must be purchased separately |
| Speed | 1 to 240 rpm with 0.1 rpm resolution | 1 to 240 rpm with 0.1 rpm resolution |
| Valve Plug | 1 for 24 V valve | 1 for 24 V valve |
| Weight | 6.4 kg (14.1 lb) | 6.4 kg (14.1 lb) |