Large Work Holding Vice
This vice has a 0 to 75 mm (0 to 3 in) clamping range. The face plate and pusher block are both 35 mm wide by 25 mm deep (1-3/8 x 1 in).
It mounts on a 13 mm (1/2 in) rod either vertically or horizontally, on a benchtop or wall, and also on such holders as the 53-2222 ball joint adapter, allowing the most awkward pieces to be held in a convenient position.
This vice has a 0 to 75 mm (0 to 3 in) clamping range. The face plate and pusher block are both 35 mm wide by 25 mm deep (1-3/8 x 1 in). It mounts on a 13 mm (1/2 in) rod either vertically or horizontally, on a benchtop or wall, and also on such holders as the 53-2222 ball joint adapter, allowing the most awkward pieces of work to be held in a convenient position.
- Precision injection molded nylon with 30% glass fiber reinforcement provides enormous strength at a great saving in weight.
- There is absolutely no corrosion possible.
- High melting point of 221°C
- Good resistance to chemicals, salt solutions and most solvents
About Harvard Apparatus Stronghold Products
This innovative, flexible, and totally integrated group of clamps, connectors and lattices meets many laboratory requirements. The nylon and glass fiber injection molding process creates an extremely strong corrosion free line of products. The high melting point of 221°C and chemical resistance makes these products the perfect material for lab settings.
Select suffix –R for a red body with white thumb screws and –W for a white body with red thumb screws.
| Specifications | 53-2142W |
|---|---|
| Accepts Mounting Rod Diameter | 0 to 13 mm (0 to 0.5 in) |
| Clamping Range | 0 to 75 mm (0 to 3 in) |
| Color | White |
| Face Plate Depth | 25 mm (1 in) |
| Face Plate Width | 35 mm (1.375 in) |
| Melting Point | 221°C |
| Pusher Block Depth | 25 mm (1 in) |
| Pusher Block Width | 35 mm (1.375 in) |
