Heated Small Animal Operating Table
This operating table is ideal for general surgical work on small animals. The top is a flat, heavy gauge, biologically inert piece of stainless steel measuring 23 x 33 cm (9 x 13 in).
A warming chamber located beneath this top contains a small metal sheathed 40 watt heater controlled by an energy regulator. An energy regulator controls the table top surface, varying the heating cycle when necessary.
A warming chamber located beneath this top contains a small metal sheathed 40 watt heater controlled by an energy regulator. An energy regulator controls the table top surface, varying the heating cycle when necessary. The regulator is calibrated from “full” to “off” through ten marked points. This allows adequate heating control for most operating procedures. Indicator lights are visible when the heater is on and when the regulator is switching.
Uniform heat distribution is maintained over the total surface by an insulation barrier located between the resistance mat and stainless steel top. Four stainless steel 6.5 mm (1/4 in) rods are supplied with the Table. Each 20.4 cm (8-1/16 in) rod is mounted on a simple slotted clamp with a locking screw. The slot of this clamp fits over the edge of the Table and allows the rod to be inserted anywhere along the edge of the Table or slid along the edge into position. Four tying cleats are also supplied which have a deep slot similar to the rod clamps to fit over the edge of the table and secure with a locking screw. The top of the cleat has a tapered slot that binds any tying strings securely in place. These cleats, like the rod, can be inserted at any point around the edge of the Table or can be slid along the edge into position. Folding legs under the Table allow the Table to be used in a tilted position.
|Material||Stainless Steel heating surface|
|Table Dimensions, L x W||33 x 23 cm (13 x 9 in)|