Centrifugal Pump

Centrifugal Pump

The centrifugal pump is specifically designed for pumping blood and/or erythrocyte suspension solutions in the physiological or pharmacological laboratory.

It consists of the pump drive BVP-ZX and a centrifugal pump head which can be replaced without tools. Pump heads are hermetically sealed. The coupling to the motor of the pump drive is carried out via magnetic force; there is no axle.

Item# Description U.S. List Price Quantity
73-2963 Centrifugal Pump Drive (BVP-ZX), 115 VAC, 50/60 Hz
73-2470 Centrifugal Pump Drive (BVP-ZX), 230 VAC
73-2807 Centrifugal Blood Pump Head (BP-80)
Login for U.S. Pricing


The centrifugal pump is specifically designed for pumping blood and/or erythrocyte suspension solutions in the physiological or pharmacological laboratory.

It consists of the pump drive BVP-ZX and a centrifugal pump head which can be replaced without tools. Pump heads are hermetically sealed. The coupling to the motor of the pump drive is carried out via magnetic force; there is no axle.

The pump speed is set using a 3-digit potentiometer switch (000 to 999) or via an analog interface. The drive is very robust and suitable for continuous speed selection operation.


Features

  • Low hemolysis 
  • Flow rates up to 16 L/min
  • No or only low pulsation 
  • Smooth run, producing only low noise 
  • Pump heads interchangeable without tool 
  • Speed setting by a digital switch in 0.1% steps 
  • “Max Speed” button for quick fill or ventilate 
  • Robust construction for long life time 
  • Analog interface for remote control

 


The pump drive and pump heads must be purchased separately. The pump heads are interchangeable and do not require tools to change.

 

Specifications

Centrifugal Pump Drives (Type BVP-ZX)

Item #               
73-2963 73-2470
Speed 3 to 3000 rpm, adjustable in 0.1% steps  3 to 3000 rpm, adjustable in 0.1% steps
Mains Connection     
115 VAC (50/60 Hz)  230 VAC (50/60 Hz)
Power Consumption   
120 W maximum  120 W maximum
Analog Interface  Speed control 0 to 5 V or 0 to10 V or 0 to 20 mA or 4 to 20
mA, start/stop (TTL contacts)
Speed control 0 to 5 V or 0 to10 V or 0 to 20 mA or 4 to 20
mA, start/stop (TTL contacts)
Protection Rating IP 30 IP 30
Operating Conditions 
0° to 40°C (normal environmental conditions) 0° to 40°C (normal environmental conditions)
Dimensions, H x W x D 260 x 155 x 260 mm (10.2 x 6.1 x 10.2 in)
without pump head
260 x 155 x 260 mm (10.2 x 6.1 x 10.2 in)
without pump head
Weight 7 kg (15.4 lb) without pump head 7 kg (15.4 lb) without pump head


Centrifugal Pump Head

Item # 73-2807
Fitting to BVP-ZX Direct
ID 9.5 mm
Manufacturer
Medtronic (BP80)
Maximum Flow Rate at 300 mmHg 3 L/min
Maximum Flow Rate at 50 mmHg 10 L/min

Priming Volume

80 mL
Pulsation No
Pump Technologies Centrifugal