The Harvard MPII Mini-Peristaltic Pump takes only one size of tubing, 1.6 mm ID x 3.2 mm OD (1/16 x 1/8 in). It can be used with either a single tube or two tubes simultaneously. Two front panel controls provide flow rates from approximately 0.8 to 12.25 ml/min. The control knob provides variable adjustment from 0 to 100% of the selected flow rate range. The second control is a two position toggle switch marked x1, x2 which selects low or high flow rates, see table to right. Search for Product in current catalog
• Continuous low flow rates ideal for: - Slow perfusion studies - Controlled animal feeding • Pump can take one or two tubes simultaneously, 1/16 in. ID • Control knob for pumping speed • Toggle switches for direction and x1 or x2 speed range selection • Low electrical and mechanical noise • Small size
The Harvard MPII Mini-Peristaltic Pump takes only one size of tubing, 1.6 mm ID x 3.2 mm OD (1/16 x 1/8 in). It can be used with either a single tube or two tubes simultaneously.
Two front panel controls provide flow rates from approximately 0.8 to 12.25 ml/min. The control knob provides variable adjustment from 0 to 100% of the selected flow rate range. The second control is a two position toggle switch marked x1, x2 which selects low or high flow rates.
The easy-loading four-roller pump head is on top of the stout metal box. The back of the pump head effortlessly rotates into an ‘open’ position and either one or two tubes can be dropped into slots. The loaded section simply rotates back against spring loaded jaws and locks into place. The tubing is automatically in proper wiping contact with the pump head rollers. Each Pump is provided with a 12.5 mm (0.5 in) rod clamp on the back so that multiple pumps can be mounted vertically on a lattice rod.
Syringe Pump use in Studies of potential-dependent metallothionein adsorptions using a low-volume electrochemical quartz crystal microbalance flow cell
