This latest innovation in Standard™ Stereotaxic Instru-ments features a sealed electronic sensor to each axis of the manipulator arm. This sensor is highly immune to outside interference and environmental conditions. Measurements are accurate to 10 microns in all three directions. Movements in all three directions are now monitored by a large, easy-to-read LED display module, with a resolution selectable from 1 mm to 10 microns.

A zeroing function allows the user to set a reference point for targeting specific coordinates on the animal’s skull for injection, implantation, etc. Calculation of distance measurements via the vernier scales is thus no longer necessary?saving the user valuable time and improving accuracy.

The classic design and high quality of our conventional Lab Standard™ manipulators are exactly the same on the new Digital Stereotaxic, with no drift and smooth movements. The Digital Lab Standard™ keeps the custom triple-start lead screws to allow fast positioning, while maintaining consistently smooth movement. The thin cords from the sensors do not interfere with movements, allowing the arm to move freely and be set at any angle.

Your Choice of Three Options
1. New Digital Lab Standard™ Stereotaxic Instrument complete with LED Digital Display.
2. Add new Digital Manipulator Arms and an LED Display to your current Lab Standard™ or similar brand of stereotaxic.
3. Convert your existing Lab Standard™ (or most other brands) by adding digital sensors to their manipulator arms. LED Display Module included.

Zeroing Function for Targeting Specific Coordinates
The display of each axis can be “ZERO”ed at any location, making operation simple and straightforward. To target a specific location, start at Bregma, and reset all coordinates to zero. Move the manipulator arm to the desired point and lower the electrode, probe, or micropipette into place.

Memory
Target coordinates can be programmed into the memory of the 72-6035 and 72-6037 Digital Lab Standard™ Stereotaxics.

Versatility of Positioning
The universal joint allows the investigator to angle the probe in either the anterior-posterior or the lateral-medial planes. The improved locking mechanism on the Lab Standard™ Stereotaxic Instruments will hold any angled position without slippage. Of course, it also provides an absolute lock at the vertical position. The manipulator arm may be swiveled out of the way for convenience in installing the animal or performing a procedure, then returned to the same point reliably with the aid of the locking face block above the swivel joint.

Accessories
All of the accessories for the Lab Standard™ Small Animal Stereotaxic Instrument fit the 72-6035 and 72-6037 Digital Lab Standard™ Small Animal Stereotaxic Instrument. Probe holders and species adapters for “U” frame stereotaxic instruments made by other manufacturers are generally compatible with the Lab Standard frame.

The 72-6035 and 72-6037 Digital Lab Standard™ Small Animal Stereotaxic Instruments come complete with a standard probe holder with corner clamp and a Rat Adapter with nose holder and 18 degree taper ear bars. The 72-6036 and 72-6038 include the non-puncture (45°) ear bars instead of the 18-degree ear bars. They are otherwise identical to the 72-6035 and 72-6037.

The time-proven U-Frame design concept, rugged construction, and adaptability to most species used in the lab make Stoelting’s Lab Standard™ series the best choice for stereotaxic instruments.