Data Acquisition Hardware, PLUGSYS Version
In this version, the 16 signals of the PLUGSYS bus system are connected to the PCI A/D converter board via the module ROM-DL (Recording Output - Direct Link) a built-in board, the DIM (Data Interface Module) and an appropriate cable. The ROM-DL and the DIM Modules are installed on the rear side of the PLUGSYS Mainframe. The PCI A/D board is installed in the computer. The DIM and the A/D board are connected by the data cable. If controlling modules such as the PSM or PPCM are requested, the DIM must be extended with the DIM-D Option.
Data Acquisition Hardware, Stand Alone Version
This version is used to connect any amplifier, flowmeter or other instruments of several different manufacturers to the HSE-HA software. Up to 16 signals can be connected to the BNC connector block. The connector block is connected to the PCI A/D converter board. The A/D board is installed in the computer.
Data Acquisition Hardware, USB Stand Alone Version
In this version, any Windows NT / 2000 / or XP based computer or laptop with a USB port can connect to any amplifier, flowmeter, or other instrument to run HSE-HA Software. Up to 16 input signals can be connected to the USB Input Box from the PLUGSYS system case or independent manufactures via BNC cables. The USB Input Box is connected to the USB port on the desktop or laptop computer.