|
|
Home
Physiology Products
Harvard Apparatus UK Hardware
Kymograph Accessories
|
| |
Kymograph Accessories
|
|
Products in Kymograph Accessories
Aluminum Lever with Point
This Light Aluminum Lever is 22.5 cm (9 in) long and has a plastic point.
more
Brodie Universal Heart Lever
The head of this Lever is drilled and tapped so that it can be mounted on the stem in any of four ways. The horizontal bar is pierced with 6 holes on 5 mm (1/5 in) pitch from the fulcrum point. The spring tension can be adjusted...
more
Condon's Sensitive Manometer
This Manometer is twice as sensitive as the normal U-shaped tube Standard Mercury Manometer. It will accurately sense pressures from 0 to 200 mmHg. It has a 280 mm (11 in) glass tube with a 2.5 mm (0.1 in) bore. The glass tube is...
more
Cup Receivers
These moulded plastic cup receivers are for recording the pulse from an artery. The cup receiver is pressed over the limb at artery site and small changes in volume in the cup are transmitted through flexible tubing to a read-out...
more
Double Pulley Holder
Mounts on the standard 9.5 mm (3/8 in) diameter rod.
more
Fixed Mount Pulley
Light weight plastic wheel with deep groove. Negligible friction since pulley runs on hard steel spindles. Mounts on standard 9.5 mm (3/8 in) rod.
more
Gimbal Lever
This Gimbal Lever has a fulcrum frame that can be mounted on the stem in either of two directions. The stem is 6.5 mm OD x 125 mm (1/4 x 5 in). The fulcrum frame carries a 73 mm (2-7/8 in) lever pierced with 4 holes in front of...
more
Ink Pen
This Ink Pen has a very small ink writing nib set in the sealed end. The reservoir holds several drops of ink for tracings. The pen and reservoir are mounted on the end of a 100 mm (4 in) aluminum stem with a split fork mount for...
more
Kerosene Smoking Burner
This Smoking Burner provides a dense black smoke for even distribution on the Kymograph Cylinder. This Smoking Burner has a reservoir that holds 100 ml of kerosene or other hydrocarbon. The heavy wick is 3 mm (1/8 in) thick, 125...
more
Kymograph Cylinders
These Kymograph Cylinders are for use with the 19 mm (3/4 in) diameter spindles of the Harvard Apparatus Universal Kymographs. Each Cylinder has 2 mounting plates for fitting it concentrically onto the Kymograph spindle. A...
more
Muscle and Heart Bath
The Complete Assembly mounts on the upright of the Harvard Apparatus Universal Kymograph, and permits a wide range of experiments with muscle-nerves and frog hearts. The apparatus is made up of three parts: the bath, the electrode...
more
Myograph Board
The Myograph Board has a 6 mm thick cork plate cemented to an acrylic bloc measuring 87 x 139 mm (3.4 x 5.5 in). At one end and one side there are 9.5 mm mounting clamps with locking screws for securing the board to a kymograph...
more
Oxford Isometric Lever
This Lever consists of a heavy C-shaped universal frame and three easily interchangeable isometric levers of different strengths. The isometric lever is held between the two arms of the frame and can be interchanged by loosening a...
more
Pen Filler
This Pen Filler is a small plastic syringe with a capacity of 1 ml, graduated by 0.1 ml increments. It is used to fill the pen supplied with the writing points.
more
Pendulum Auxotonic Lever
The Pendulum Auxotonic Lever is mainly for study of the extensibility of tissue under the action of drugs. This Lever is supplied with one pair each of 5, 10, and 20 gram weights. As the preparation moves, these weights move in...
more
Piston Recorders
These high quality Piston Recorders are precisely manufactured. The glass cylinders are made of specially drawn and annealed glass tubing, which has been ground true. The aluminum alloy pistons are individually matched to the...
more
Printed Kymograph Paper Sheets
This high quality Kymograph Paper has a special glaze for ink recording. Each Sheet has an additional 15 mm wide strip that is gummed for mounting the Sheet onto a 500 mm (19.7 in) circumference Kymograph Cylinder. Each vertical...
more
Sensitive Water Manometer
For recording very sensitive movements such as venous pressure. The U-shaped glass tube is 350 mm (14 in) long and has a large 9 mm (0.35 in) bore. The scale is movable for zero adjustment and is calibrated from 0 to 250 mm in 10...
more
Simple Lever and Frontal Writing Point
This Complete Simple Lever Assembly consists of a 50-6519 Simple Lever, 50-6477 Frontal Writing Point with Aluminum Stem and 50-7681 Ink Pen. The Lever has a 6.5 mm (1/4 in) OD, 10 cm (4 in) long mounting rod. The fulcrum of the...
more
Simple Lever and Frontal Writing Point Accessories
The individual components of the Complete Simple Lever Assembly are also available separately. They are: Replacement Simple lever (50-6519), Replacement Frontal Writing Point with Aluminum Stem (50-6477) and Replacement Ink Pen...
more
Standard Mercury Manometer
The glass U-shaped tube of this Manometer is 300 mm (12 in) long and has a bore of 5 mm (0.2 in). The scale is movable for zero adjustment, and is calibrated from 0 to 250 mm in 10 mm increments. The Manometer mounts on a standard...
more
Starling Heart Lever
This Starling Heart Lever has an arm that is pierced with six holes of 5 mm (1/5 in) pitch from the fulcrum point. The spring tension is also adjustable. The Lever can be mounted on any standard 9.5 mm (3/8 in) diameter rod. The...
more
Stem Mount Pulley
Grooved 25 mm (1 in) diameter wheel mounted in needle bearings.
more
Strawholder Lever
The frame of this Lever is drilled with four holes so that the mounting stem can be positioned vertically or in three directions on the horizontal plane. The 6.5 mm (1/4 in) OD stem is 12.5 cm (5 in) long. A spring-loaded metal...
more
Student Isometric Lever
The Student Isometric Lever consists of a wire spring with lever held in a C-shaped frame with mounting rod. The wire is locked securely at one end by a large wing nut with the opposite end pivoting freely. The length of rod that...
more
Swivel Mount Pulleys
Light weight plastic wheel with deep groove. Swivels Negligible friction since the Pulley runs on hard steel spindles. Mounts on standard 9.5 mm (3/8 in) diameter rod. Available in three sizes.
more
Tambours
These tambours are for gas displacement indication measurements. A rubber diaphragm is stretched over a cylinder and held in place by a rubber O-ring (supplied) which slips on and beds itself in a groove along the edge of the...
more
Unprinted Kymograph Paper Sheets for Ink Recording
This high quality plain Paper is specially glazed for either ink recording or smoke recording. Each Sheet has an additional 15 mm wide strip that is gummed for mounting the Sheet on the Kymograph Cylinder. Supplied in a package of...
more
Unprinted Kymograph Paper Sheets for Smoke Recording
This high quality plain Paper is specially glazed for either ink recording or smoke recording. Each Sheet has an additional 15 mm wide strip that is gummed for mounting the Sheet on the Kymograph Cylinder. Supplied in a package of...
more
Weight Sets
These Weight Sets consist of a hook/weight pan and nine pierced disk weights. The assembly hangs from the hook when the weights are in place. Three sets are available with total weights of 10, 50 and 100 grams. The 10 Gram Set has...
more
Writing Ink
This specially prepared ink is for use with fine capillary tubing and fine writing styli. Available in two sizes.
more
|
|
|
