Welcome to Harvard Apparatus! — Login / Register
Search

Search for these keywords
Home Catalogs Online Technical Resources My Account
Shopping Cart
Advanced Search   
Products by Category

Featured Products
Warner Cell Electrophysiology & Cell Biology Research
Hugo Sachs Elektronic Isolated Organ and Tissue Systems
BTX Electroporation and Electrofusion Products
Panlab Behavior Research Products
Hoefer Electrophoresis Products
Coulbourn Instruments
Clark Glass Products
Navicyte Ussing/Diffusion Chambers
CMA
Harvard Apparatus

GoDaddy
 

Home Physiology Products Harvard Apparatus UK Hardware Kymograph Accessories
 


Kymograph Accessories


Products in Kymograph Accessories

Aluminum Lever with Point This Light Aluminum Lever is 22.5 cm (9 in) long and has a plastic point. more

Brodie Universal Heart Lever The head of this Lever is drilled and tapped so that it can be mounted on the stem in any of four ways. The horizontal bar is pierced with 6 holes on 5 mm (1/5 in) pitch from the fulcrum point. The spring tension can be adjusted... more

Condon's Sensitive Manometer This Manometer is twice as sensitive as the normal U-shaped tube Standard Mercury Manometer. It will accurately sense pressures from 0 to 200 mmHg. It has a 280 mm (11 in) glass tube with a 2.5 mm (0.1 in) bore. The glass tube is... more

Cup Receivers These moulded plastic cup receivers are for recording the pulse from an artery. The cup receiver is pressed over the limb at artery site and small changes in volume in the cup are transmitted through flexible tubing to a read-out... more

Double Pulley Holder Mounts on the standard 9.5 mm (3/8 in) diameter rod. more

Fixed Mount Pulley Light weight plastic wheel with deep groove. Negligible friction since pulley runs on hard steel spindles. Mounts on standard 9.5 mm (3/8 in) rod. more

Gimbal Lever This Gimbal Lever has a fulcrum frame that can be mounted on the stem in either of two directions. The stem is 6.5 mm OD x 125 mm (1/4 x 5 in). The fulcrum frame carries a 73 mm (2-7/8 in) lever pierced with 4 holes in front of... more

Ink Pen This Ink Pen has a very small ink writing nib set in the sealed end. The reservoir holds several drops of ink for tracings. The pen and reservoir are mounted on the end of a 100 mm (4 in) aluminum stem with a split fork mount for... more

Kerosene Smoking Burner This Smoking Burner provides a dense black smoke for even distribution on the Kymograph Cylinder. This Smoking Burner has a reservoir that holds 100 ml of kerosene or other hydrocarbon. The heavy wick is 3 mm (1/8 in) thick, 125... more

Kymograph Cylinders These Kymograph Cylinders are for use with the 19 mm (3/4 in) diameter spindles of the Harvard Apparatus Universal Kymographs. Each Cylinder has 2 mounting plates for fitting it concentrically onto the Kymograph spindle. A... more

Muscle and Heart Bath The Complete Assembly mounts on the upright of the Harvard Apparatus Universal Kymograph, and permits a wide range of experiments with muscle-nerves and frog hearts. The apparatus is made up of three parts: the bath, the electrode... more

Myograph Board The Myograph Board has a 6 mm thick cork plate cemented to an acrylic bloc measuring 87 x 139 mm (3.4 x 5.5 in). At one end and one side there are 9.5 mm mounting clamps with locking screws for securing the board to a kymograph... more

Oxford Isometric Lever This Lever consists of a heavy C-shaped universal frame and three easily interchangeable isometric levers of different strengths. The isometric lever is held between the two arms of the frame and can be interchanged by loosening a... more

Pen Filler This Pen Filler is a small plastic syringe with a capacity of 1 ml, graduated by 0.1 ml increments. It is used to fill the pen supplied with the writing points. more

Pendulum Auxotonic Lever The Pendulum Auxotonic Lever is mainly for study of the extensibility of tissue under the action of drugs. This Lever is supplied with one pair each of 5, 10, and 20 gram weights. As the preparation moves, these weights move in... more

Piston Recorders These high quality Piston Recorders are precisely manufactured. The glass cylinders are made of specially drawn and annealed glass tubing, which has been ground true. The aluminum alloy pistons are individually matched to the... more

Printed Kymograph Paper Sheets This high quality Kymograph Paper has a special glaze for ink recording. Each Sheet has an additional 15 mm wide strip that is gummed for mounting the Sheet onto a 500 mm (19.7 in) circumference Kymograph Cylinder. Each vertical... more

Sensitive Water Manometer For recording very sensitive movements such as venous pressure. The U-shaped glass tube is 350 mm (14 in) long and has a large 9 mm (0.35 in) bore. The scale is movable for zero adjustment and is calibrated from 0 to 250 mm in 10... more

Simple Lever and Frontal Writing Point This Complete Simple Lever Assembly consists of a 50-6519 Simple Lever, 50-6477 Frontal Writing Point with Aluminum Stem and 50-7681 Ink Pen. The Lever has a 6.5 mm (1/4 in) OD, 10 cm (4 in) long mounting rod. The fulcrum of the... more

Simple Lever and Frontal Writing Point Accessories The individual components of the Complete Simple Lever Assembly are also available separately. They are: Replacement Simple lever (50-6519), Replacement Frontal Writing Point with Aluminum Stem (50-6477) and Replacement Ink Pen... more

Standard Mercury Manometer The glass U-shaped tube of this Manometer is 300 mm (12 in) long and has a bore of 5 mm (0.2 in). The scale is movable for zero adjustment, and is calibrated from 0 to 250 mm in 10 mm increments. The Manometer mounts on a standard... more

Starling Heart Lever This Starling Heart Lever has an arm that is pierced with six holes of 5 mm (1/5 in) pitch from the fulcrum point. The spring tension is also adjustable. The Lever can be mounted on any standard 9.5 mm (3/8 in) diameter rod. The... more

Stem Mount Pulley Grooved 25 mm (1 in) diameter wheel mounted in needle bearings. more

Strawholder Lever The frame of this Lever is drilled with four holes so that the mounting stem can be positioned vertically or in three directions on the horizontal plane. The 6.5 mm (1/4 in) OD stem is 12.5 cm (5 in) long. A spring-loaded metal... more

Student Isometric Lever The Student Isometric Lever consists of a wire spring with lever held in a C-shaped frame with mounting rod. The wire is locked securely at one end by a large wing nut with the opposite end pivoting freely. The length of rod that... more

Swivel Mount Pulleys Light weight plastic wheel with deep groove. Swivels Negligible friction since the Pulley runs on hard steel spindles. Mounts on standard 9.5 mm (3/8 in) diameter rod. Available in three sizes. more

Tambours These tambours are for gas displacement indication measurements. A rubber diaphragm is stretched over a cylinder and held in place by a rubber O-ring (supplied) which slips on and beds itself in a groove along the edge of the... more

Unprinted Kymograph Paper Sheets for Ink Recording This high quality plain Paper is specially glazed for either ink recording or smoke recording. Each Sheet has an additional 15 mm wide strip that is gummed for mounting the Sheet on the Kymograph Cylinder. Supplied in a package of... more

Unprinted Kymograph Paper Sheets for Smoke Recording This high quality plain Paper is specially glazed for either ink recording or smoke recording. Each Sheet has an additional 15 mm wide strip that is gummed for mounting the Sheet on the Kymograph Cylinder. Supplied in a package of... more

Weight Sets These Weight Sets consist of a hook/weight pan and nine pierced disk weights. The assembly hangs from the hook when the weights are in place. Three sets are available with total weights of 10, 50 and 100 grams. The 10 Gram Set has... more

Writing Ink This specially prepared ink is for use with fine capillary tubing and fine writing styli. Available in two sizes. more

Get Rolling & Infuse Savings
...on Surgical Solutions and Syringe Pumps!
Get rolling and infuse savings
For special end-of-year offers such as savings on Surgical Solutions and information on how to get a FREE Hamilton 1000 Series GASTIGHT® PTFE Luer Lock Syringe.


2013 Pumps Catalog
legendary performance for every application
129 Pages of Syringe, Persitaltic, Blood, Pressure, Piston Pumps & Accessories.
  • Infusion
  • Dispensing
  • Cell Injection
  • Perfusion
  • MS Calibration
  • More




 

Products on this website are for Research Use Only. Not for use in humans unless
proper investigational device regulations have been followed.


Privacy Policy   |   Terms and Conditions   |   Site Map
Copyright© Harvard Apparatus - All rights reserved.

Phone Orders: 800-232-2380

Technical Sales: 800-597-0580

Tech Support: 800-547-6766


1-800-272-2775   1-508-893-8999
Website-related comments or concerns can be emailed to our webmaster.

Anesthesia Equipment Animal Handling Products Behavior Research Products Biological Measurement Products Cardiovascular Products Cell Biology Products CPK® Atomic Models Delivery & Sampling Products Dialysis / Sample Prep / SPE Electrophysiology Products Electroporation / Transfection General Laboratory Products Homeothermic/Temperature Control Isolated Organ & Isolated Tissue Microincubation / Microinjectors Molecular Biology Products Neuroscience Products Non-Invasive Blood Pressure Physiology Products Respiratory Products Stereotaxic Instruments Surgical Equipment Surgical Instruments Syringe Pumps/Peristaltic Pumps Tubing & Connectors Ventilators Application Specific Product Overviews