|
|
Home
General Laboratory Products
Clamps and Stands and Lattices
Clamps
|
| |
Clamps
|
|
Products in Clamps
Burette Clamps
Burette Clamps
The single burette clamp has two small clamps mounted vertically 100 mm (4 in) apart to hold firmly in two places burettes, tubes, rods, thermometers, etc. The clamps do not obstruct the scale. The jaws open to 16...
more
Column/Tube Clamps
Column/Tube Clamp
Two Medium Clamps are mounted vertically 100 mm (4 in) apart to hold firmly in two places columns, large tubes, etc. The jaws open to 45 mm (1-3/4 in). It mounts into either the 53-2012 closed connector,...
more
Condenser Clamps
Condenser Clamp
These two clamps are mounted vertically 100 mm (4 in) apart to hold firmly in two places condensers, large columns, large tubes, etc. The jaws open to 85 mm (3-1/3 in). It mounts into either the 53-2012 closed...
more
Large Clamps
Large Clamp Two moving jaws with fixed screw action, have a clamping range from 3 to 85 mm (1/8 to 3-1/3 in) with a 9.5 mm OD x 150 mm (3/8 x 6 in) with a long mounting stem. The clamp mounts either the 53-2012 closed connector,...
more
Lattice Clamps
Lattice Clamp
The lattice clamps has two open sides for holding rods at right angles to each other and accepts rods up to 13 mm (1/2 in) in diameter. The locking screws are M5 (5 mm) thread Allen set screws 13 mm (1/2 in) long....
more
Medium Clamps
Medium Clamp
Two moving jaws with fixed screw action, have clamping range from completely closed to 45 mm (0 to 1-3/4 in) with a 9.5 mm OD x 150 mm (3/8 x 6 in) long mounting stem. The clamp mounts either the 53-2012 closed...
more
Small Clamps
Small Clamp
Two moving jaws with fixed screw action, have a clamping range from completely closed to 16 mm (0 to 5/8 in) with a 6.4 mm OD x 125 mm (1/4 x 5 in) long mounting stem. The clamp mounts into either the 53-2012 closed...
more
|
|
|
