6 Electrode Respirometer Model RC 650
For use with the 928 6 channel oxygen system - for replicate respiration measurements of cell suspensions, microbial suspensions, mitochondria or enzyme preparations The respirometer consists of a sealed water both containing six...
more
Flow Cell FC 100
The acrylic chamber of the flowcell screws onto the electrode holder. Only the tip of the electrode projects into the water flow. The inlet and outlet tubes are made from stainless steel. The electrode holder is fitted with a...
more
General Electrode Holder EH 100
The electrode holder is a black acetal tube in which the electrode is located so that its tip projects from the end. The holder is used for the insertion of the electrode into your own respiration chamber. An acrylic collar...
more
Microcathode Oxygen Electrode Model 1302
This is a Clark-type polarographic electrode with a 22 micron diameter platinum cathode and silver/silver chloride anode connected by a buffered potassium chloride electrolyte solution. In the normal configuration the cathode is...
more
MicroCell Model MC 100
The all-glass sample chamber has a capacity of approximately 70µl. Samples are injected into the chamber through a 1mm stainless steel tube fitted with a fine p.v.c needle-locating collar. Alternatively, the cell can be used as a...
more
Mitocell Miniature Respirometer Model MT 200 and MT200A
This new Mitocell Miniature Respirometer has a chamber volume of only 50 µl and was introduced for measurements on mitochondria isolated from biopsy samples. It can be used in any situation where sample size is limited. The base...
more
Respiration Cells RC 300 and RC 350
These respiration cells are for small volume measurements of oxygen uptake rate by microbial suspensions, cell suspensions, mitochondria or enzyme preparations. The electrode holder (supplied with the cell) slides into one of two...
more