Anesthetizing Chamber with Gas Scavenging
Further enhance the flexibility of your Fluovac system by the addition of a special anesthetizing chamber. No modifications to the existing Fluovac unit are necessary.
more
Directavalves
Gas flow can be sent in one of two directions by simply turning a small valve on top of the assembly.
more
Fluovac Isolator Valve
A most useful addition to our gas scavenging range, the valve redirects gas from the FLUOVAC mask when out of use for short periods. The advantage is that neither the Vaporizer setting nor the flowmeter setting have to be altered...
more
Fluovac Mask Support
Designed to hold a Fluovac mask in position on a flat surface. This support minimizes the risk of movement between the animal and the mask.
more
Fluovac Replacement Tubing
This Tubing is used with the Fluovac System.
more
Fluovac Restrainer Tube
Used for induction of anesthesia if the patient cannot be held at the Fluovac mask - the Size 1 mask end is simply plugged into the end of the unit which is then supplied with anesthetic gas and is also scavenged. The patient is...
more
Gas Flow Directors
An effective yet simple method of eliminating the Connector Set from the IMS Fluovac system. Directs the flow of gas to either or both double rodent mask simply by turning the knob.
more
Scavenged Anesthetizing Chamber
For use in conjunction with the Fluovac. It is easy to use - simply plug a size one mask into the rear socket, turn on the Fluovac and gas supply.
more
Anesthetizing Chamber with Gas Scavenging
Directavalves
Fluovac Isolator Valve
Fluovac Mask Support
Fluovac Replacement Tubing
Fluovac Restrainer Tube
Gas Flow Directors
Scavenged Anesthetizing Chamber
