Trigger Input/Output Module

Trigger Input/Output Module

Trigger Input/Output Module

Item# Description U.S. List Price Quantity
73-1633 Trigger Input/Output Module (ROM-T)
Login for U.S. Pricing
• Provides 2 trigger inputs and 2 trigger outputs to the PLUGSYS system
• For triggering external equipment like oscil-loscopes or stimulators
• For synchronization of HSE-HA software with external equipment (e.g., stimulators, ventilators, etc.)
This module is used as a trigger input and output. BNC sockets 1 and 2 are used as trigger outputs, the BNC sockets 3 and 4 are used as trigger inputs.
This module is connected to the module ROM-A and mounted in the PLUGSYS Mainframe from the rear. With the trigger outputs 1 and 2 it is possible to trigger an oscilloscope from a PLUGSYS module providing this feature.
With the trigger inputs 3 and 4 it is possible to trigger a PLUGSYS module from the outside, e.g. triggering a module with an external stimulator.
Requires a ROM-A module to connect to the PLUGSYS Bus.
Specifications73-1633
Accessories2 BNC-BNC output cables
Dimensions (H x W x D) English5.1 x 0.8 x 4.3 in
Dimensions (H x W x D) Metric128.7 x 20.2 x 100 mm
Input2 inputs, TTL or CMOS-signal dynamic inputs, acting on falling edge
Output2 TTL outputs, open collector TTL signal, low activ. pull-up resistor 2.2 k?
PLUGSYS Width*1 slot unit
Weight (English)5.3 oz
Weight (Metric)150 g