Syringe Warmer (SWS Series)
The SWS-Series Syringe Warmers from Warner Instruments provides a simple and effective method for maintaining a stable temperature within a syringe. The compact design of this warmer allows it to be used either with a syringe pump or mounted on a support stand.
- Syringe heaters designed for use on a syringe pump or a support stand (for gravity flow applications)
- Accommodates 10, 60, and 140 cc syringes
- Scale marking ports allow user to monitor volume in syringe during use
- Can be powered from 12 volt battery for sensitive electrophysiology applications
The thermally controlled heater housing slides onto a 10, 60 or 140 cc syringe and is held in place with a self adjusting friction band. The housing incorporates a resistive element and thermistor, which when connected to a Warner temperature controller, allows the syringe warmer to be maintained at a constant temperature.
The SWS Syringe Warmer housing is made of anodized aluminum which is both corrosion resistant and serves as an excellent thermal conductor. Solutions usually reach the set temperature within 15 minutes of the application of power.
Be sure to order the TC-124A Temperature Controller with your SWS Series Syringe Warmer.
|Syringe Size||10 cc||60 cc||140 cc|
|Heater Weight||32.7 g||76.0 g||192.0 g|
|Heater Length||38.25 mm||83.75 mm||109.50 mm|
|Dimensions (ID x OD)||16.2 x 22.3 mm||29.2 x 35.0 mm||41.4 x 51.0 mm|
|Heater Resistance||18 ohm|
|Voltage Requirement||Variable to 12V max.|
|Temperature Range||ambient to 65°C (limited by temperature controller)|
|Temperature Accuracy||± 1°C|
|Cable Length||2.4 m|