Sensitive Force Transducer (0-25 g)

Sensitive Force Transducer (0-25 g)

The MLT0202 is a high-sensitivity force transducer suitable for measuring very small forces under isometric conditions. The transducer is suitable for connection to all ADInstruments Bridge Amps.

Item# Description U.S. List Price Quantity
77-0123 Sensitive Force Transducer (0-25g), Model MLT0202
Login for U.S. Pricing

The MLT0202 is a high-sensitivity force transducer suitable for measuring very small forces under isometric conditions. The transducer is suitable for connection to all ADInstruments Bridge Amps.


Operation:

Mount the transducer by inserting the support rod through the hole of a micropositioner or clamp and connect it to an 8-pin Din input on the front of a Bridge Amp. Take the thread tied to the tissue and attach it to the transducer by tying a loop around the cleft in the double plate on the end of the detecting rod which protrudes from the side of the transducer body. Using the micropositioner or clamp, adjust the tension in the thread to provide the desired amount of pre-load tension on the tissue.

Application:

The MLT0202 Sensitive Force Transducer is ideal for isolated tissue studies where very small forces are being measured and has been designed for operation with our range of organ bath models.
Specifications77-0123
Amplification Input AmplifierSee product page for complete specifications
Body Length English2.8 in
Body Length Metric70 mm
Body Width English1.4 in
Body Width Metric35 mm
Bridge Resistance624 Ω
Cable Length English6.6 ft
Cable Length Metric2 m
Connector8-pin DIN
Displacement Range±0.03 mm
Excitation5 to 10 V DC
ModelMLT0202
Non linearity and Hysteresis±0.57 % full scale
Operating Range0 to 25 g wt
Package1
Product FamilyData Acquisition
ResolutionInfinite
Resonant Frequency215 Hz (Typical)
Sensitivity(full range) 100 mV/V
Weight162 g