Quick Exchange Heated / Cooled Platform for 35 mm Petri Dishes (QE-1HC)
The Warner QE-1HC is designed to work with Warner RC-40 quick change imaging chambers and all 35 mm cell culture dishes.
The Warner QE-1HC is designed to work with Warner RC-40 quick change imaging chambers and all 35 mm cell culture dishes. Precise temperature control of the media is possible when combined with our low noise CL-100 or CL-200A temperature controller and LCS-1 Thermal Cooling Module (heat exchanger). An integral water jacket is used to remove excess heat from the internal Peltier device.
Magnetic clamps hold cell culture dishes and quick change imaging chambers securely in place. Magnetic stainless steel along the perimeter of the platform allows for the use of included magnetic suction and perfusion tube holders (included).
Fits Series 20 stage adapters. All major microscope stages are accommodated. Custom or modified stage adapters are also available; call our Technical Support Department for details.
The QE-1HC is supplied with a 35 mm adapter ring kit- set of six, three sets of magnetic clamps for holding Petri dishes, one humidifying cover, one TA-29 bead thermistor, one MAG-3 magnetic holder for wires, one perfusion tube with magnetic holder, one suction tube with magnetic holder, 10 feet of PE-160 tubing, 20 feet of 1/8 ID x 1/4 OD soft tubing, 50 feet of 1/16 Tygon tubing, and a lift tool.
|Footnote||2. 100 M and 200 M|
|Temperature Range||5° to 50°C|
|Feedback Thermistor||Built in Unical 10kΩ at 25°C|
|Controller||CL-100 Bipolar Controller|
|Aperture Size||(D x L) 25.4 mm|
|Thermal Insert Size||(D x L x H) 64.0 x 92.2 x 10.5 mm|
|Cable Length||2.4 m|
|Connector Type||15 pin Male "D"|
|Water Jacket Ports||1/8" Barb Fittings|
|QE-1HC Quick Exchange Platform with SC-20:
cooling with perfusion
|CL-200 Temperature Controller:|
|Set Temperature SC-20||0.0oC|
|QE-1HV Plate Set Temperature||0.0oC|
|Flow Rate||2 ml/min.|