PSCI-PP ADDITION FOR PERFUSION PRESSURE MEASUREMENT TO PSCI, 73-4428

PSCI-PP  ADDITION FOR PERFUSION PRESSURE MEASUREMENT TO PSCI, 73-4428

PSCI-PP ADDITION FOR PERFUSION PRESSURE MEASUREMENT TO PSCI, 73-4428

Item# Description U.S. List Price Quantity
73-1523 PLUGSYS Minicase, Type 609
73-1793 Transducer Amplifier Module (TAM-D)
73-3862 APT300 Pressure Transducer for PLUGSYS Module
Login for U.S. Pricing

PSCI-PP ADDITION FOR PERFUSION PRESSURE MEASUREMENT TO PSCI, 73-4428

Includes:

  • PLUGSYS Minicase
  • TAM-D Transducer Amplifier Module
  • Pressure Transducer
Specifications73-152373-179373-3862
CertificationsMains Supply Cable and Operating Instructions, 2 x BNC-BNC Output lines (3 if with case extension Option 01)TAM-A LED bar graph 20 LEDs (+13/-7) for visual check on the signal sensitivity approx. 1V/LED TAM-D 3 1/2-digit LED displayCE
Connection Cable Length Metric6.3 x 6.3 x 9.8 in; Option 01 = 8.1 inThrough 10-turn trimmer coarse adjustment and electronic autozero by push button (LED for error if autozero is not possible)3 m
Excitation Voltage160 x 160 x 250 mm; Option 01 = 206 mm+5V / 50 mA max.2 — 15 V DC (or AC up to 5 kHz)
Frequency ResponseABS plastic, flame-resistant to UL94VO, color RAL7032 (stone gray), with ventilation slots at sidesSelectable by switch on front panel:
a) 0 V output signal with switch in position '0'
b) Positive or negative calibration output voltage adjustable with 10-turn trimmer if switch is in position 'CAL'
>1 kHz
Isolation Against Fluid4 slot units max. without extension case; possible to fit 6 slot units using internal straps, Option 1 case extensionSelectable ranges by internal Jumper: 0.2 to 10, 0.4 to 20, 1 to 50, 2 to 100, 4 to 200, 10 to 500, 20 to 1000, 100 to 5000, 200 to 10000. Fine Adjustment Through 10-Turn Trimmer>5,000 V
Operating Pressure85 to 264 VAC (40 Watts), output voltage +5 VDC (5 A) and a) Selectable by switch on front panel for pulsatile output signal: 1, 100, 300 Hz
b) Selectable by internal jumper for mean output signal: 0.1, 0.3 Hz
–300 to 300 mmHg
Operating Temperature Metric3-pin IEC mains with fuse and mains switch on back of housing2 slot units15 to 40 °C
Output Impedance3.1 lbs approx. without PLUGSYS modules+5V through connector from PLUGSYS bus system356 ± 1% Ω
Overload Pressure1.4 kg approx. without PLUGSYS modulesa) On front panel through BNC socket 4,000 mmHg
Pressure Range6-pin socket with screw lock (binder, Amphenol Tuchel) Differential input circuit, imput impedance 1010?± 300 mmHg
Sensitivity5 µV/V/mmHg
Storage Temperature Metric–25 to 70 °C
Suitable AmplifiersPLUGSYS
Temperature Coefficient< 1% /°C
Volume Displacement< 0.04 mmˆ3/100 mmHg
Zero Drift< 0.2 mmHg/°C
Zero Offset<25 mmHg
Zero Offset Control<25 mmHg