Programmable Pulse Generator Module

Programmable Pulse Generator Module

Programmable Pulse Generator Module

Item# Description U.S. List Price Quantity
73-3097 Programmable Pulse Generator Module (PPG)
73-0223 DIM-D PLUGSYS DIGITAL BUS LINK FOR DIM MODULE TYPE 708/1
73-3497 SOFTWARE STIMULUS FOR PSM AND PPG CONTROL FOR WIN
73-0224 SOFTWARE MODULE FOR PSM AND PPG CONTROL FOR WIN
Login for U.S. Pricing
• Microprocessor controlled
• All functions programmable via PLUGSYS I/O and MS-WIN PC
• Complementary TTL pulse output Software Features
• Stimulation mode free run or hardware triggered
• Single pulse or train stimulation
• Stand alone system with PPG control software
• Fully supported and controlled by HSE-HA Software

The PPG Programmable Pulse Generator Module is a module of the HSE PLUGSYS measurement system. In combination with a MS-Windows compatible computer, additional I/O hardware and the PPG control software, the module forms a programmable stimulation pulse generator (repetition rate and pulse width). The stimulus outputs are TTL compatible and have a minimum drive capability of 4 standard TTL inputs. The complementary output offers both active high and active low pulse signals. Therefore the PPG can direct control e.g. up to four HSE UISO Universal Isolated Stimulator Outputs or any external stimulator output stage with TTL gating or trigger possibility. The PPG is connected to the A/D converter and controller board of the computer via the DIM and its extension DIM-D. The DIM and the A/D board are connected by the data cable. The DIM-Module is installed on the rear side of the PLUGSYS mainframe, the A/D converter and controller board is installed in the computer. The software installed on the control computer presents a menu to adjust the different stimulation parameters pulse width and frequency. These parameters can be stored on disk for later use. The PPG control software has to be recalled to make any changes in the stimulation parameters.
Specifications73-3097
Ambient Conditions: Humidity20 to 80% relative humidity, no condensation
Ambient Conditions: Operating Temperature0 to 40
Ambient Conditions: Storage Temperature-20 to + 60
ConnectorDIN 41612, 96-pin VG (PLUGSYS System Bus)
Output2 Stimulus TTL outputs (1 POS and 1 NEG), BNC sockets on front panel
Output Resistance50 Ohm
PLUGSYS Width*1 slot unit (20.2 mm)
Power Supply5 V, 350 mA max from PLUGSYS system bus
PulsesTTL compatible
Rise and Fall Time200 nsec.