Permanent Installation Temperature Thermistor Probes
Price on Request
For permanent installation in pipes and closed vessels. Fittings can withstand 500 p.s.i.
Time constant 3.4 seconds
Many other thermistor probes are available.
These probes are for permanent installation in pipes and closed vessels. The probe’s fittings can withstand 500 p.s.i. The 4 mm (0.16 in) diameter stainless steel shaft is supplied complete with a 3.2 mm (1/8 in) National Pipe Thread compression fitting. The shorter shaft Probe has a detachable lead. Time constant 3.4 seconds. Maximum temperature is 150°C (302°F). Not isolated.
| Item# | 60-2317 |
60-2316 |
| Interchangeability Tolerance |
±0.1oC over biological range from 32o to 42oC |
±0.1oC over biological range from 32o to 42oC |
| Compressor Fitting Diameter | 3.2 mm (0.125 in) | 3.2 mm (0.125 in) |
| Handle Length | 20.6 mm (0.8125 in) | 23.8 mm (0.9375 in) |
| Lead Length |
3.1 m (10 ft) |
3.1 m (10 ft) |
| Maximum p.s.i. | 500 |
500 |
| Maximum Temperature |
150oC (302oF) |
150oC (302oF) |
| Minimum Temperature |
-40oC (-40oF) | -40oC (-40oF) |
| Probe Wire Isolation |
Not Isolated | Not Isolated |
| Shaft Diameter | 4 mm (0.16 in) | 4 mm (0.16 in) |
| Shaft Length |
11.4 mm (4.5 in) |
2.4 mm (1.0 in) |
| Shaft Material | Stainless Steel |
Stainless Steel |
| Time Constant |
3.4 seconds | 3.4 seconds |