TU BI NG Laboratory Tubing Micro-Line™ Tubing This remarkable new cross-linked Ethyl Vinyl Acetate Tubing is ideal for biological use. It is stable, non-contaminating and contains no plasticizers that could migrate or leach out. The mechanical properties of this material are unique. It has virtually 100% elastic memory and will return to its original shape after stretching by gentle heating. It will stretch to fit over tubes and fittings. Micro-Line™ Tubing can be shaped with heat to form various shapes or can be cold-stretched to reduce the internal diameter by 40%. Tubing is flexible and non-kinking from below zero to 180°F. The Tubing can be sterilized by autoclaving, dry heat, radiation or ethylene oxide gas sterilization and is supplied in 30 m (100 ft) spools. (continued) Disposable Pressure Tubing Disposable Pressure Tubing TUBING L Laboratory Tubing KEY FEATURES Ideal for infusion studies Easily extend infusion lines from syringe to needle or catheter Micro-Line™ Tubing ORDER # PC4 59-8644 PC4 59-8645 PC4 59-8646 ID (mm) 1.0 1.3 OD (mm) 1.8 2.3 ID (in.) 0.040 0.050 OD (in.) 0.070 0.090 length (m) length (ft.) 30.5 30.5 100 100 Set of 2 spools This Pressure Tubing is the ideal way to connect the output from a syringe to the delivery mechanism for an infusion study. It has a male Luer Lock connector on one end and a female Luer Lock connector on the other. This tubing has an ID of 1.6 mm (1/16 in) and an OD of 3.2 mm (1/8 in). Tubing volume is 0.6 ml per 12 inches of tubing. It is available in 8 lengths and is supplied sterile in packages of 25. Disposable Pressure Tubing Order # PC4 63-0281 PC4 63-0282 PC4 63-0283 PC4 63-0284 PC4 63-0286 PC4 63-0287 PC4 63-0288 Product Disposable Pressure Tubing, 15.2 cm (6 in) Disposable Pressure Tubing, 30.5 cm (12 in) Disposable Pressure Tubing, 61 cm (24 in) Disposable Pressure Tubing, 91.4 cm (36 in) Disposable Pressure Tubing, 152.4 cm (60 in) Disposable Pressure Tubing, 182.9 cm (72 in) Disposable Pressure Tubing, 213.4 cm (84 in) Disposable High Pressure Tubing This Tubing is similar to the tubing described above except it can withstand pressures up to 1000 p.s.i. It has a male Luer Lock connector on one end and a female on the other. This tubing has an ID of 1.6 mm (1/16 in) and an OD of 3.2 mm (1/8 in). Supplied as straight pieces of tubing in a package of 10. Disposable High Pressure Tubing Order # PC4 63-0297 PC4 63-0299 Product Disposable High Pressure Tubing, 25.4 cm (10 in) Disposable High Pressure Tubing, 76.2 cm (30 in) Harvard Apparatus phone 508.893.8999 toll free U.S. 800.272.2775 fax 508.429.5732 www.harvardapparatus.com 95