BL OO D PUMPS Centrifugal Pump for Blood BLOOD PUMPS Centrifugal Pump Centrifugal Pump Specifications Pump Drive TYPE SPEED MAINS CONNECTION POWER CONSUMPTION ANALOG INTERFACE PROTECTION RATING OPERATING CONDITIONS DIMENSIONS, H x W x D WEIGHT Centrifugal Pump Heads TYPE MANUFACTURER PUMP TECHNOLOGIES MAXIMUM FLOW RATE PULSATION PRIMING VOLUME INLET/OUTLET ID BP-80 Medtronic Centrifugal BP-50 Medtronic Centrifugal SP-45 Terumo Impeller (Centrifugal) BVP-ZX 3 to 3000 rpm, adjustable in 0.1% steps 230 (50/60Hz) 115 V (50/60Hz) 120 W maximum Speed control 0–5 V or 0–10 V or 0–20 mA or 4–20 mA, start/stop (TTL contacts) IP 30 0° to 40°C (normal environmental conditions) 260 x 155 x 260 mm (10.2 x 6.1 x 10.2 in) without pump-head 7 kg (15.4 lbs) without pump head Centrifugal Pump for Blood 10 l/min at 50 mmHg – 16 l/min at 50 mmHg 3 l/min at 300 mmHg – 13 l/min at 300 mmHg no 80 ml 9.5 mm Direct no 50 ml 6.4 mm Direct yes 45 ml 9.5 mm Adaper SP-03 Required KEY FEATURES Low hemolysis Flow rates up to 16 L/min Little to no pulsation Smooth run, producing only low noise Pump heads interchangeable without tool Speed setting by a digital switch in 0.1% steps “Max Speed” button for quick fill or ventilate Robust construction for long life Analog interface for remote control The centrifugal pump is specifically designed for pumping blood and/or erythrocyte suspension solutions in the physiological or pharmacological laboratory. It consists of the pump drive BVP-ZX and a centrifugal pump head which can be replaced without tools. The Pump Drive and Pump Head must be purchased separately. Pump heads are hermetically sealed. The coupling to the motor of the pump drive is carried out via magnetic force; there is no axle. The pump speed is set using a 3-digit potentiometer switch (000 to 999) or via an analog interface. The drive is very robust and suitable for continuous speed selection operation. FITTING TO BVP-ZX Order # PC4 73-2963 PC4 73-2470 PC4 73-2807 PC4 73-2954 PC4 73-2955 PC4 73-2956 Product BVP-ZX Centrifugal Pump Drive, 115 VAC, 50/60 Hz BVP-ZX Centrifugal Pump Drive, 230 VAC, 50/60 Hz BP-80 Centrifugal Pump Head BP-50 Centrifugal Pump Head SP-45 Centrifugal Pump Head SP-03 Adaptor for SP-45 Head Note: Pump Drive and Pump Head must be purchased separately. Harvard Apparatus phone 508.893.8999 toll free U.S. 800.272.2775 fax 508.429.5732 83