PERI ST ALTIC PUMP S MCP Pump Drive PERISTALTIC PUMPS 1 6 2 7 4 5 3 8 Rear panel of MCP 1. Foot Switch/Hand Dispenser 2. RS-232 Interface (in) 3. RS-232 Interface (out) 4. Valve Connector 5. 6. 7. 8. Analog Interface Voltage Selector Fuse Holder Mains Supply Socket MCP Pump Drive All functions of the MCP drive can be controlled via PC via the RS-232 interface MCP Pump Drive Specifications MODEL SPEED BACK PRESSURE MAINS CONNECTION POWER CONSUMPTION RS-232 INTERFACE 8 PUMPS ANALOG INTERFACE DIGITAL INPUT (TTL LEVEL) VALVE PLUG PROTECTION RATING ELECTRO MAGNETIC IMMUNITY ELECTRO MAGNETIC RADIATION OPERATING CONDITIONS DIMENSIONS, H x W x D WEIGHT MCP pump drive only, pump head must be purchased separately 1 to 240 rpm with 0.1 rpm resolution 1.5 bar maximum (22 PSI) 115 VAC (50/60 Hz) or 230 VAC (50/60 Hz) 100 W maximum Baud rate 9600 or 1200 baud, 8 bit, 1 stop bit, no parity for complete computer control for cascade control or up to 8 pumps Speed control 0–5 V or 0–10 V respectively 0–20 mA or 4–20 mA Flow direction, start/stop, speed control 1 for 24 V valve IP 30 EN 50082-1 EN 55022 Class B 0° to 40°C (normal environmental conditions) 260 x 155 x 220 mm (10.2 x 6.1 x 8.7 in) without pump head 6.4 kg (14.1 lbs) KEY FEATURES Stores 4 programs in memory Dispensing volumes in ml and flow rates in ml/min Calibrate in ml/min Various dispensing modes (time, volume, interval and flow rate, drip-free) MAX-key for priming and rapid filling or emptying of the tube system APPLICATIONS Filling of bottles and test tubes Dispensing of pre-defined volumes This programmable pump drive offers various dispensing modes, providing highly reproducible and accurate results. Pump head must be purchased separately. A wide selection of pump heads with single or multi-channel capabilities are available for the MCP pump drive. See pages 72 to 75. Multi-functional Display For tube sizes, speed, flow-rates, dispensing time, dispensing volume, interval duration and totally delivered volume as well as operational mode, flow direction and MAX-key for priming. Order # PC4 73-3026 PC4 73-3029 PC4 73-3048 Product MCP Pump Drive, 230 VAC, 50/60 Hz MCP Pump Drive, 115 VAC, 50/60 Hz Foot Switch for MCP Pump Drive Calibration: Dispensing Volume/Flow Rate Volume and flow rate can be pre-set and calibrated in ml or ml/min. The drives are pre-calibrated according to the pre-programmed pump heads and tube sizes. 70 Harvard Apparatus phone 508.893.8999 toll free U.S. 800.272.2775 fax 508.429.5732