S Y RI NG E PUMP A C C E S S O R IE S Pressure Transducers for PHD ULTRA™ CP Syringe Pump P75 Venous Pressure Transducer & P1500 Pressure Transducer (continued) SYRINGE PUMP ACCESSORIES Millar Pressure Catheters 2F Pressure Catheter SPR-407 Millar pressure catheters continue to represent the gold standard for high-fidelity pressure measurements for both systematic and intraventricular applications. Adapters and cables are available to connect catheters directly to the range of Harvard Apparatus pressure amplifiers. Order # P75 Venous Pressure Transducer The P75 has a removable Macrolon® dome with a pressure connection and a vent connection at the side, so that it can be filled free of air bubbles. The dome connections have a male Luer taper so that suitable stopcocks* can be attached. The transducer has a metal housing. The actual pressure sensor inside is made from ceramic and therefore has excellent resistance to different media. The transducer’s rugged construction can withstand pressure overloads up to 4000 mmHg without damage. It works together with any DC bridge amplifier (e.g., PLUGSYS TAM-A). PC4 72-9842 Model HEC-10C Product Pressure Catheter with Viking Connector to PLUGSYS TAM Amplifier Pressure Catheter with Low Profile Connector to PLUGSYS TAM Amplifier 1F, Single pressure, 20 cm, Straight, Non-repairable (Low Profile) 1.4F Single pressure,1.1F-2F body 15 cm from tip, 65 cm (Low Profile) 2F Sensor, 1.5F Body, Single Pressure, 140 cm, Straight (Viking) 3.5F Single pressure, 100 cm, Straight, Non-repairable (Viking) Adapters and Cables Pressure Transducers for PHD ULTRA™ CP Syringe Pump PC4 72-9843 HEC-10D Millar Pressure Catheters PC4 72-9781 PC4 72-9779 PC4 72-9775 PC4 72-9777 SPR-1000 SPR-671 SPR-407 SPR-524 P1500 Pressure Transducer For applications requiring constant pressure control in the 0-30 PSI (0-2 bar) range, we offer the P1500 Pressure Transducer. Like the P75, it has a removable Macrolon® dome with a 90° pressure connection and 45° vent connection on the top side for filling the dome bubble free. The dome connections have a male Luer lock so that suitable stopcocks* can be attached. The transducer has a metal housing. The actual pressure sensor inside is made from ceramic and therefore has excellent resistance to different media. The transducer works with any DC bridge amplifier (e.g. PLUGSYS TAM-A) but is supplied with the connector for the TAM. Configurations for other amplifiers available upon request. *Use one each of PC4 73-0096 three-way stopcock and PC4 73-0097 one-way stopcock Order # PC4 73-0020 PC4 73-3806 Product Blood Pressure Transducer P75 for PLUGSYS TAM Amplifier Blood Pressure Transducer P1500 for PLUGSYS TAM Amplifier P75 and P1500 Pressure Transducers Specifications Model PRESSURE RANGE OVERLOAD SENSITIVITY TEMPERATURE RANGE ZERO DRIFT RANGE DRIFT LONG-TERM DRIFT VOLUME DISPLACEMENT FREQUENCY RANGE OUTPUT RESISTANCE EXCITATION VOLTAGE PRESSURE CONNECTIONS CONNECTION CABLE MOUNTING ROD, OD x L Harvard Apparatus phone 508.893.8999 P75 Pressure Transducer ±75 mmHg (±100 cmH2O) -760 (=vacuum) to 4,000 mmHg 1 mV/mmHg, nominal 0° to 50°C ±0.04 mmHg/10°C (0° to 50°C) ±0.04 mV/10°C (±0.04 mmHg/10°C) (0° to 50°C) ±0.04 mmHg FS/Year 0.06 mm3/10 mmHg 0 to 100 Hz 5 V (4.5 to 5.5 V) DC only Male Luer Lock 1.5 m (4.9 ft) long 8 x 70 mm (0.31 x 2.76 in) toll free U.S. 800.272.2775 P1500 Pressure Transducer ±1,500 mmHg (±30 PSI) 13,500 mmHg 0.05 mV/mmHg, nominal -20° to 80°C ±0.5% FS (-20° to 80°C) ±0.5% FS (-20° to 80°C) ±0.1% FS/Year 0.004 mm3/10 mmHg 0 to 300 Hz 300 Ω, nominal fax 508.429.5732 www.harvardapparatus.com 43