Syringe Pumps Customized Solutions - OEM and Special Syringe Pumps SYRINGE PUMPS Pump 11 Elite/Pico Plus Elite OEM Module KEY FEATURES Accuracy of ±0.35% or ±0.5% Footprint of 16.25 x 24.1 x 10.8 cm (6.5 x 9.5 x 4.25 in) 1.28 pl/min to 88.28 ml/min CE, ETL (UL, CSA), WEEE, EU RoHS & CB Scheme OEM and Special Syringe Pumps General Features and Capabilities • All of our OEM modules are based upon our proven digital syringe pump technology delivering the same accuracy and reproducibility as our stand alone pumps. • The modules consist of 3 basic components – a drive mechanism assembly, a motor assembly, and a circuit board assembly. In standard configurations, all are mounted to a base plate. These subassemblies can be purchased individually if required. • All units have the ability to run in either direction (infuse/withdraw) at separate rates and target volumes. • Although computer control is most commonly used for communication, a voltage level control for start/stop and change of direction is available. Our newer PHD ULTRA™ and Pump 11 Elite based modules can be rate controlled using an external DC 0-10 volt signal. • All systems will accept input voltages over the range of 12-30 volts DC. • Modification to accommodate existing designs or future designs is available. • Modules can be linked together in a daisy chain fashion for complete computer control of up to 16 separate pumps at once. The PHD ULTRA™ based versions can control up to 99 pumps simultaneously. • Our newest model, based upon our new PHD ULTRA™ syringe pump design, incorporates a stable mechanism, has an extended pushing block, larger guide rods, and easily adjustable capturing brackets and limit stops which fully protect the syringe and prevent siphoning. Models with either 75 or 200 pounds of adjustable force are available. These also offer a more enhanced I/O control and a USB serial port. • We can configure our modules to support directional control valves, heating and cooling devices, custom syringes, and more. Pump 11 Elite OEM Module Specifications TYPE ACCURACY REPRODUCIBILITY SYRINGE TYPE SYRINGE SIZE Minimum Maximum FLOW RATE: Minimum 1.28 pl/min (Pump 11 Elite) 0.54 pl/min (Pico Plus Elite) 0.5 µl 60 ml (10 ml dual) Microprocessor dual syringe, infusion/withdrawal ±0.5% (Pump 11 Elite) ±0.5% Plastic or glass ±0.35% (Pico Plus Elite) Maximum 88.28 ml/min (Pump 11 Elite Single Syringe Version) 26.02 ml/min (Pump 11 Elite Dual Syringe Version) 39.77 ml/min (Pico Plus Elite Single Syringe Version) 11.70 ml/min (Pico Plus Elite Dual Syringe Version) 16 kg (35 lbs) at 100% force selection RS-485 IEEE-1394, 6 position Type B 15-pin D-Sub Connector 16.25 x 24.1 x 10.8 cm (6.5 x 9.5 x 4.25 in) 2.7 kg (6 lbs) CE, ETL (UL, CSA), WEEE, EU RoHS & CB Scheme AVERAGE LINEAR FORCE CONNECTORS: USB I/O & TTL OVERALL DIMENSIONS, HXWXD WEIGHT REGULATORY CERTIFICATIONS Order # PC4 70-4800 PC4 70-4801 PC4 70-4802 PC4 70-4803 Product Pump 11 Elite OEM Module (Single Syringe) Pump 11 Elite OEM Module (Dual Syringe) Pico Plus Elite OEM Module (Dual Syringe) Pico Plus Elite OEM Module (Single Syringe) Harvard Apparatus phone 508.893.8999 toll free U.S. 800.272.2775 fax 508.429.5732 www.harvardapparatus.com 35