Lamp and Stirplate Bundle (SUNStir-3)

Lamp and Stirplate Bundle (SUNStir-3)

The SUNStir-3 System is comprised of the SUNStir controller, a SUN-1 lamp and a SPIN-2 stirplate. This convenient, rack-mountable system is designed to provide simultaneous control for both the SUN-1 lamp and the SPIN-2 stirplate.

Lamp

  • Noise-free electronics
  • Dichroic reflector
  • Halogen bulb
  • Adjustable spotlight intensity with external control device
  • Magnetic base with gooseneck and swivel-head lamp

Stirplate

  • Stir while recording
  • Independent cis/trans dipoles
  • Minimized magnetic flux through bilayer membrane
  • Steel side panels

Item# Description U.S. List Price Quantity
64-0076 SUNSTIR-3 Complete SunStir-3 System, Includes Sun-1 Lamp, Spin-2 Stirrer and SunStir Controller
64-0075 SUNSTIR Sunstir Controller Optional Dual Function (Lamp plus Stirplate)
64-0074 SPIN-2 SPIN-2 Dual Channel Spin Plate with Tabletop Controller
64-0061 SUN-1 Halogen Lamp with Tabletop Controller, 120 VAC, 60 Hz
64-1512 (SUN-1) Halogen lamp, 200-240 VAC 50/60 Hz
64-0065 SUN-DCH Replacement 12 W-12 V Dichroic Bulb for Sun-1 Lamp
460-8092 1U Rack handle
64-0454 Ground cable, banana-banana, 48"
Login for U.S. Pricing

Controller SUnStir-3 Lamp

The SUNStir controller is a rack-mountable instrument designed to provide quiet and efficient control of the SUN-1 Lamp and SPIN-2 Stirrer.

Lamp

The SUN-1 is an externally controlled, noise-free halogen light source suitable for inclusion in a shielded enclosure. The magnetic base attaches securely to any steel tabletop and the lamp swivel-head allows projection of the beam in virtually any direction. Recent modifications to the design of the reflector result in significant improvements in the lamp's performance.

The lamp is comprised of a magnetic base with 12 gooseneck for accurate positioning of the illumination spot. A jointed swivel-head at the end of the gooseneck allows the beam to easily subtend a solid angle of 2 steradians (half of a sphere).

Beam intensity is adjustable to one of eight levels via the rack-mount controller. The lamp electronics are well isolated to prevent the introduction of external EMF into the Faraday cage enclosure and allows recording of data even while the lamp is on.

A dichroic reflector reduces much of the projected heat from the lamp and allows longer illumination times without significant warming the object under study.

Stirrer

Bilayer work often requires stirring of contents on both sides of a bilayer membrane. The SPIN-2 Bilayer Stirplate achieves this task by providing two spinning dipoles in a mechanically quiet apparatus.

Stirring of solutions in a bilayer cup and chamber has traditionally been achieved using a commercial stirplate. Unfortunately, these devices are not designed for use in a bilayer rig and present a single rotating magnetic dipole to the bilayer chamber.

A result of these characteristics is that it is impossible to simultaneously stir both wells since the stirbars will be drawn to a common rotational axis defined by the stirplate magnet. The resulting collisions between the stirbars and the bilayer cup introduces a noise artifact into the acquired data. Many researchers avoid this problem by not stirring while recording, which is an undesirable state of affairs.

The SPIN-2 stirplate from Warner Instruments Spin-2 stirplateis designed to specifically address these problems experienced by researchers in the field.

First, it has two separate spinning dipoles, one each for the cis and trans wells. This design allows the stirbars within each well to be independently controlled which virtually abolishes cup/stirbar collisions. The relative separation between the two dipoles is adjustable allowing the apparatus to be used with bilayer cups and chambers of different sizes.

Second, the rotation characteristics (speed and phase) of the two spinning dipoles is digitally controlled. This allows the device to present the minimum magnetic flux to the bilayer membrane. A liquid crystal display allows the researcher to view the rotating dipoles in real-time.

Third, the apparatus is both electrically isolated and mechanically quiet. In addition, steel strips are provided on each side of the liquid crystal window for attachment of magnetic holders and the like. This provides a convenient method of positioning a perfusion head.

Taken together, these features allow the SPIN-2 to be used while acquiring data.

Specifications
SunStir
Controls  
Controller Power on/off switch, Speed rotary control
Stirplate Position adjust (rotary)
Display
Controller LED; flashes once per complete rotation
Stirplate Magnetic field display; passive LCD
Speed range 300 to 600 RPM
Rotor
Synchronization Counter-rotating with magnets repelling
Position adjustment
(center-to-center)
0.4 to 2.5 inches
Dimensions
Stirplate 5.5 x 8.0 x 2.3 in (W x D x H)
Weight
Stirplate 3.0 lb

 

Spin-2
Controls  
Controller
Stirplate
Power on/off switch, Speed rotary control
Position adjust (rotary)
Display
Controller
Stirplate
LED; flashes once per complete rotation
Magnetic field display; passive LCD
Speed range 300 to 600 RPM
Rotor
Synchronization Counter-rotating with magnets repelling
Position adjustment
(center-to-center)
0.4 to 2.5 inches
Dimensions
Stirplate 5.5 x 8.0 x 2.3 in (W x D x H)
Weight
Stirplate 3.0 lb

 

Sun-1
Lamp Halogen bulb, dichroic reflector; 20 W-12 V.
High impact polyamide housing; swivel head; spot reflector; clear lens
Gooseneck 1.4 cm diameter x 30.5 cm length; with PVC sleeve
DOCUMENT DESCRIPTION
Warner Bilayer Workstation brochure (rev 060601).pdfWarner Bilayer Workstation Brochure
SUN-1 (110504).pdfHalogen Lamp (SUN-1) Manual
SUNStir-3 (050816).pdfSUNStir-3 User's Manual