IPL-4 Core System 230 V 73-4296

IPL-4 Core System 230 V   73-4296

IPL-4 Core System 230 V, Isolated Perfused Lung System for Rabbit to Fetal Pig, 73-4296 

Item# Description U.S. List Price Quantity
73-4138 BASIC UNIT FOR THE ISOLATED PERFUSED LUNG SIZE 4 TYPE 841/1 (RABBIT)
73-0125 THERMOSTATIC CIRCULATOR E 103, BATH VOLUME 3 L, 230 V/50 Hz
73-0322 RESERVOIR JACKETED FOR BUFFER SOLUTION, WITH FRIT, 6L
73-2441 BVP-SB3/230V ROLLER PUMP, 3 CHANNELS, EACH 0.2 - 870 ML/MIN
73-0045 PLUGSYS Case, Type 603
73-0020 Blood Pressure Transducer P75 for PLUGSYS Module
73-1793 Transducer Amplifier Module (TAM-D)
73-2806 Servo Controller for Perfusion (SCP) Type 704, 73-2806
59-9349 Heated Linear Pneumotachometer 0 to 10 L/min flow range
59-9703 Heater Controller for Single Pneumotachometer 230 VAC, 50 Hz
73-3882 DIFFERENTIAL LOW PRESSURE TRANSDUCER DLP2.5, RANGE +- 2.5 cmH2O, HSE CONNECTOR
73-0065 Transducer Amplifier Module (TAM-A)
73-0064 DIFFERENTIAL PRESSURE TRANSDUCER MPX, TYPE 399/2, RANGE +- 100 cm H2O, HSE CONNECTOR
Login for U.S. Pricing

MEASURED SIGNALS & PARAMETERS ON AN IPL-4 BASIC SYSTEM:

The Following Signals are Recorded as Raw Data:

  • Pulmonary Artery (Perfusion) Pressure
  • Perfusion Flow
  • Intrapleural (artificial thorax) Pressure orTracheal Pressure
  • Respiratory Flow

 

The Following Parameters can be Calculated from the Raw Data*:

  • Tidal Volume, Minute Volume
  • Peak Inspiratory and Expiratory Airflow
  • Vascular Resistance
  • Respiration Rate
  • Inspiratory Time & Expiratory Time
  • End Inspiratory and Expiratory Pressure
  • Dynamic Airway Resistance & Compliance

 

* Calculations are automatic

 

For a working unit, the core system requires the addition of a selection of one of the option VCMR-4 or PPV-4 in combination with PPV-683 or PPV-Inspira.

Specifications73-004573-002073-179373-280659-934973-006573-0064
ApplicationLine Cable, Spare Fuses, Screw driver for fitting Function Modules, Document Folder for Operating Instructions of Function Modules, 3 x BNC-BNC Output linesCETAM-A LED bar graph 20 LEDs (+13/-7) for visual check on the signal sensitivity approx. 1V/LED TAM-D 3 1/2-digit LED displayOperating Instructions, Screwdriver, Output Cable to Pump7 mmH2OTAM-A LED bar graph 20 LEDs (+13/-7) for visual check on the signal sensitivity approx. 1V/LED TAM-D 3 1/2-digit LED displayOnly for dry air
Depth English5.2 x 19 x 17.1 in4.9 ftThrough 10-turn trimmer coarse adjustment and electronic autozero by push button (LED for error if autozero is not possible)0 - 10 V via System Bus3.28 mlThrough 10-turn trimmer coarse adjustment and electronic autozero by push button (LED for error if autozero is not possible)1.4
Depth Metric132 x 483 x 435 mm14.5 m+5V / 50 mA max.Laboratory Indoors0 to 10 L/min+5V / 50 mA max.36
Excitation VoltageMetallic housing, gray plastic coated, Universal 19 inch case with pivoting feet, prepared for rack mounting15 mA max.Selectable by switch on front panel:
a) 0 V output signal with switch in position '0'
b) Positive or negative calibration output voltage adjustable with 10-turn trimmer if switch is in position 'CAL'
DIN 41612, 96-pin VG600348 or 600349Selectable by switch on front panel:
a) 0 V output signal with switch in position '0'
b) Positive or negative calibration output voltage adjustable with 10-turn trimmer if switch is in position 'CAL'
0 to 5 VDC or AC
Height English20 slot units max.0 to 100 HzSelectable ranges by internal Jumper: 0.2 to 10, 0.4 to 20, 1 to 50, 2 to 100, 4 to 200, 10 to 500, 20 to 1000, 100 to 5000, 200 to 10000. Fine Adjustment Through 10-Turn TrimmerPlug-in Module for a PLUGSYSRabbitSelectable ranges by internal Jumper: 0.2 to 10, 0.4 to 20, 1 to 50, 2 to 100, 4 to 200, 10 to 500, 20 to 1000, 100 to 5000, 200 to 10000. Fine Adjustment Through 10-Turn Trimmer0.9
Height Metric100 to 240 VAC, 50/60 Hz, built-in line filter, 100 W max. consumption±0.15 mmHga) Selectable by switch on front panel for pulsatile output signal: 1, 100, 300 Hz
b) Selectable by internal jumper for mean output signal: 0.1, 0.3 Hz
1 - 50, Adjustablea) Selectable by switch on front panel for pulsatile output signal: 1, 100, 300 Hz
b) Selectable by internal jumper for mean output signal: 0.1, 0.3 Hz
24
Inlet/Outlet Nozzel ID Metric3-pin IEC mains with fuse and mains switch on back of housing±0.04 mmHg2 slot units0 - 10 V to Operate the Pump2 slot units2
Inlet/Outlet Nozzel Length Metric14.3 lbsAll gases and liquids which do not attack Macrolon®+5V through connector from PLUGSYS bus system0.1 - 100, Adjustable+5V through connector from PLUGSYS bus system9
Inlet/Outlet Nozzel OD Metric6.5 kg2.76 ina) On front panel through BNC socket Servo Controller for Perfusion (SCP) Type 704a) On front panel through BNC socket 4.7
Input Resistance70 mm6-pin socket with screw lock (binder, Amphenol Tuchel) Differential input circuit, imput impedance 1010?Range -1999 to +1999, Selectable for Actual Value, Setpoint, or Control Output Signal6-pin socket with screw lock (binder, Amphenol Tuchel) Differential input circuit, imput impedance 1010?400 to 550
Linearity0.31 inElectronic PID Controller for Physiological and Pharmacological Research
Offset Voltage8 mm0.05 - 10, Adjustable1 mV maximum
Output Resistance300 Ω, nominal2 slot units600 to 1000
Overpressure English?760 (= vacuum) to 4,000 mmHg5 V, 0.3 A from PLUGSYS750
Overpressure MetricLuer taper, male0 - 10 V, BNC Socket
Pressure Ranges±75 mmHg0 - 5 V, Adjustable
Sensitivity±0.04 mV/10°C (±0.04 mmHg/10°C) (0° to 50°C)0.3 kg0.3 to 0.8 mV/Bar