IPL-2 Core System 115V 73-4276

IPL-2 Core System 115V  73-4276

IPL-2 Core System 115V 73-4276

Item# Description U.S. List Price Quantity
73-0155 3-Stop Tygon® E-Lab Tubing, 2.79 mm ID, 12/pack, Purple/White
73-2266 BASIC UNIT FOR THE ISOLATED PERFUSED LUNG SIZE 2 (IL2) TYPE 829/2
73-2802 THERMOSTATIC CIRCULATOR E 103, BATH VOLUME 3 L, 115 V/60 Hz
73-3440 RESERVOIR JACKETED FOR BUFFER SOLUTION, WITH FRIT, 2L
73-3456 Tube Set for Jacketed Buffer Reservoir with Fluid Line Shutoff Valves
73-0113 ISM 827/115V ROLLER PUMP REGLO ANALOGUE, 4 CHANNELS, 0.002 - 30 ML/MIN
73-1839 3-Stop Tygon® E-Lab Tubing, 3.17 mm ID, 12/pack, Black/White
73-0045 PLUGSYS Case, Type 603
73-0020 Blood Pressure Transducer P75 for PLUGSYS Module
73-1793 Transducer Amplifier Module (TAM-D)
73-2806 Servo Controller for Perfusion (SCP) Type 704, 73-2806
73-3882 DIFFERENTIAL LOW PRESSURE TRANSDUCER DLP2.5, RANGE +- 2.5 cmH2O, HSE CONNECTOR
73-0064 DIFFERENTIAL PRESSURE TRANSDUCER MPX, TYPE 399/2, RANGE +- 100 cm H2O, HSE CONNECTOR
73-0065 Transducer Amplifier Module (TAM-A)
73-2488 OP. TABLE SIZE 5 FOR IPL 2
Login for U.S. Pricing
CORE SYSTEM FOR THE ISOLATED PERFUSED LUNG SIZE 2 (IPL-2), 115V VERSION
Specifications73-015573-011373-183973-004573-002073-179373-280673-006473-0065
Analog IndicationPurple-WhiteSpeed Control 0 - 5 V or 0 - 10 V and 0 - 20 mA respectivelyBlack-WhiteLine Cable, Spare Fuses, Screw driver for fitting Function Modules, Document Folder for Operating Instructions of Function Modules, 3 x BNC-BNC Output linesCETAM-A LED bar graph 20 LEDs (+13/-7) for visual check on the signal sensitivity approx. 1V/LED TAM-D 3 1/2-digit LED displayOperating Instructions, Screwdriver, Output Cable to PumpOnly for dry airTAM-A LED bar graph 20 LEDs (+13/-7) for visual check on the signal sensitivity approx. 1V/LED TAM-D 3 1/2-digit LED display
Bridge BalanceTygon® E-Lab1.0 bar (14.5 PSI)Tygon® E-Lab5.2 x 19 x 17.1 in4.9 ftThrough 10-turn trimmer coarse adjustment and electronic autozero by push button (LED for error if autozero is not possible)0 - 10 V via System Bus1.4Through 10-turn trimmer coarse adjustment and electronic autozero by push button (LED for error if autozero is not possible)
Bridge Supply Voltage2.79 mm5.6 x 3.9 x 7 in3.17 mm132 x 483 x 435 mm14.5 m+5V / 50 mA max.Laboratory Indoors36+5V / 50 mA max.
Electrical Calibration143 x 100 x 178 mmMetallic housing, gray plastic coated, Universal 19 inch case with pivoting feet, prepared for rack mounting15 mA max.Selectable by switch on front panel:
a) 0 V output signal with switch in position '0'
b) Positive or negative calibration output voltage adjustable with 10-turn trimmer if switch is in position 'CAL'
DIN 41612, 96-pin VG0 to 5 VDC or ACSelectable by switch on front panel:
a) 0 V output signal with switch in position '0'
b) Positive or negative calibration output voltage adjustable with 10-turn trimmer if switch is in position 'CAL'
GainRotation direction, Start/Stop20 slot units max.0 to 100 HzSelectable ranges by internal Jumper: 0.2 to 10, 0.4 to 20, 1 to 50, 2 to 100, 4 to 200, 10 to 500, 20 to 1000, 100 to 5000, 200 to 10000. Fine Adjustment Through 10-Turn TrimmerPlug-in Module for a PLUGSYS0.9Selectable ranges by internal Jumper: 0.2 to 10, 0.4 to 20, 1 to 50, 2 to 100, 4 to 200, 10 to 500, 20 to 1000, 100 to 5000, 200 to 10000. Fine Adjustment Through 10-Turn Trimmer
Output Low-Pass Filter115 V / 50 Hz or 230 V / 50 Hz100 to 240 VAC, 50/60 Hz, built-in line filter, 100 W max. consumption±0.15 mmHga) Selectable by switch on front panel for pulsatile output signal: 1, 100, 300 Hz
b) Selectable by internal jumper for mean output signal: 0.1, 0.3 Hz
1 - 50, Adjustable24a) Selectable by switch on front panel for pulsatile output signal: 1, 100, 300 Hz
b) Selectable by internal jumper for mean output signal: 0.1, 0.3 Hz
PLUGSYS Width*35 ml/min3-pin IEC mains with fuse and mains switch on back of housing±0.04 mmHg2 slot units0 - 10 V to Operate the Pump22 slot units
Power Supply0.002 ml/min14.3 lbsAll gases and liquids which do not attack Macrolon®+5V through connector from PLUGSYS bus system0.1 - 100, Adjustable9+5V through connector from PLUGSYS bus system
Signal Output46.5 kg2.76 ina) On front panel through BNC socket Servo Controller for Perfusion (SCP) Type 7044.7a) On front panel through BNC socket
Transducer Input870 mm6-pin socket with screw lock (binder, Amphenol Tuchel) Differential input circuit, imput impedance 1010?Range -1999 to +1999, Selectable for Actual Value, Setpoint, or Control Output Signal400 to 5506-pin socket with screw lock (binder, Amphenol Tuchel) Differential input circuit, imput impedance 1010?
20 W0.31 inElectronic PID Controller for Physiological and Pharmacological Research
IP 308 mm0.05 - 10, Adjustable1 mV maximum
yes300 Ω, nominal2 slot units600 to 1000
MS-4/8-100?760 (= vacuum) to 4,000 mmHg5 V, 0.3 A from PLUGSYS750
1 to 100 rpmLuer taper, male0 - 10 V, BNC Socket
Adjustable in 1% steps (0-99%)±75 mmHg0 - 5 V, Adjustable
3 to 99%, resolution 1%, 2 digit potentiometer±0.04 mV/10°C (±0.04 mmHg/10°C) (0° to 50°C)0.3 kg0.3 to 0.8 mV/Bar