IH5-WH 115 V WORKING HEART OPTION TO IH-5 CORE SYSTEM, 73-4411

IH5-WH  115 V WORKING HEART OPTION TO IH-5 CORE SYSTEM, 73-4411

IH5-WH 115 V WORKING HEART OPTION TO IH-5 CORE SYSTEM 73-4411

Item# Description U.S. List Price Quantity
73-3064 WORKING HEART OPTION TO BASIC UNIT TYPE 843 (IH-5)
73-0115 MCP-SB2/115V ROLLER PUMP, 2 CHANNELS, EACH 2-1100 ML/MIN
73-0020 Blood Pressure Transducer P75 for PLUGSYS Module
73-0065 Transducer Amplifier Module (TAM-A)
Login for U.S. Pricing
IH5-WH 115 V WORKING HEART OPTION TO IH-5 CORE SYSTEM 73-4411

The Working Heart option must be paired with the system configuration  “Langendorff Working Heart-Ready Configuration.” If you are upgrading
from a Working Heart-Ready configuration or are building a Working Heart System from scratch, then simply add the
Working Heart Option and one or both of the species-specific options below.

Includes:

  • Left Atrial Cannulating System

° Preload Reservoir (2-7 mL capacity)
° Movable Atrium Connection Adapter
° Holder for Preload Pressure Transducer

  • Peristaltic Pump with Tubing
  • Preload Pressure Measurement

° Venous Pressure Transducer
° TAM-A Amplifier

Utilizes 2 Slot Units

Specifications73-002073-0065
Analog IndicationCETAM-A LED bar graph 20 LEDs (+13/-7) for visual check on the signal sensitivity approx. 1V/LED TAM-D 3 1/2-digit LED display
Bridge Balance4.9 ftThrough 10-turn trimmer coarse adjustment and electronic autozero by push button (LED for error if autozero is not possible)
Bridge Supply Voltage14.5 m+5V / 50 mA max.
Electrical Calibration15 mA max.Selectable by switch on front panel:
a) 0 V output signal with switch in position '0'
b) Positive or negative calibration output voltage adjustable with 10-turn trimmer if switch is in position 'CAL'
Gain0 to 100 HzSelectable ranges by internal Jumper: 0.2 to 10, 0.4 to 20, 1 to 50, 2 to 100, 4 to 200, 10 to 500, 20 to 1000, 100 to 5000, 200 to 10000. Fine Adjustment Through 10-Turn Trimmer
Output Low-Pass Filter±0.15 mmHga) Selectable by switch on front panel for pulsatile output signal: 1, 100, 300 Hz
b) Selectable by internal jumper for mean output signal: 0.1, 0.3 Hz
PLUGSYS Width*±0.04 mmHg2 slot units
Power SupplyAll gases and liquids which do not attack Macrolon®+5V through connector from PLUGSYS bus system
Signal Output2.76 ina) On front panel through BNC socket
Transducer Input70 mm6-pin socket with screw lock (binder, Amphenol Tuchel) Differential input circuit, imput impedance 1010?