Cooling Systems allow thermostatic baths, circulators and immersion thermostats to operate at or below room temperature, by means of a coil dipped into the bath. The coil is made of nickel-plated copper, and is designed to fit in the bath such that it doesn't impinge on the working area (except S5).
Refrigerated coolers consist of a cooling coil connected by a flexible pipe to a refrigeration unit, which is housed in an outer case. Immersion coolers extract heat continuously, with temperature control carried out by the bath’s control unit.
The CW5 heat exchange coil is designed to be attached to a supply of cooling tap water, or a refrigerated
|Coil, Diam. x Length English||3 x 2.2 in||3 x 4.1 in||3 x 2.2 in|
|Coil, Diam. x Length Metric||77 x 55 mm||77 x 105 mm||77 x 55 mm|
|Cooling Power at 20|
|Cooling Power at 40|
|Dimensions (H x W x D) English||na||8.9 x 18.1 x 12 in||8.9 x 18.1 x 12 in|
|Dimensions (H x W x D) Metric||na||225 x 460 x 305 mm||225 x 460 x 305 mm|
|Electrical Supply VAC||na||115 or 220||115 or 220|
|Flexible Pipe Length Metric||na||36.4 in||36.4 in|
|Min. Temp. Range with S Series Tanks||2||-15||0|
|Overall Consumption||na||500 W||300 W|
|Temperature Range||2||-20 to 40||0 to 40|