Hydraulic-Lift/Pedestal Base Operating Table Accessories

Hydraulic-Lift/Pedestal Base Operating Table Accessories

Hydraulic-Lift/Pedestal Base Operating Table Accessories

Item# Description U.S. List Price Quantity
59-9524 Base with Casters adds mobility to Hydraulic Lift and Pedestal Base Surgery Tables; two heavy-duty plated steel caster bars attach easily to existing leveling screws in the Table base; all four casters are equipped with locks
59-6830 Collecting Pail, 11.9 liter (12-1/2 qt) capacity; seamless, noncorrosive stainless steel construction; 25.4 cm (10 in) deep with a 20 cm (7-7/8 in) diameter base
Login for U.S. Pricing
These sturdy operating tables are for use with animals up to 136.2 kg (300 lb) and are available with any combination of the below features:
• V-top or flat-top
• Pedestal or hydraulic-lift base
• Tilting mechanism
• Heated or non-heated top
V-Top
The v-top table is 147.5 x 48 cm (58 x 19 in). Each panel adjusts independently from horizontal to near vertical for exact positioning without a thoracic positioner.
A 76.2 mm (3 in) trough centered under the panels can be used to collect fluids. The table has a hook for a collecting pail which is offered as an accessory. Two tie-down attachments on each side of the table slide along the table edge and lock at any position.
Flat-Top
The extra large 152.5 x 56 cm (60 x 22 in) flat top is die-formed from one piece of heavy-gauge stainless steel with rounded corners, resulting in no welding, seams or sharp edges. The table center is slightly elevated so that fluids drain to a shallow trough around table edges. The drain outlet on the end has a hook for a collecting pail which is offered as an accessory. Two sliding tie-down attachments on each side can be locked at any position along the edge of the table.
Hydraulic-Lift Base
The lift mechanism of the hydraulic-lift base is completely foot-operated, both up and down, allowing quick and easy adjustment of the table top to a comfortable height and position. Pumping action on a rubber pedal smoothly lifts the table top. Pressing down on a release bar causes the table top to glide down to the lowest position.
The v-top table height may be adjusted from 79 to 104 cm (31 to 41 in). The flat-top Table height may be adjusted from 75 to 100 cm (29-1/2 to 39-1/2 in). The heavy base provides real stability and includes leveling screws. The base cover is made of heavy-gauge, satin finish, type 304, non-corrosive stainless steel to provide a lifetime of service.

Pedestal Base
This base provides a sturdy, stable support for the working surface, yet in no way interferes with your legs and feet as you move around the work surface. Four adjustable screws facilitate easy leveling. The working height of the pedestal base with a v-top table is 94 cm (37 in); with a flat-top table, it is 89 cm (35 in). The pedestal base is covered with heavy gauge, non-corrosive stainless steel.
Tilting Mechanism
These operating tables offer a one end tilt mechanism. All tables will revolve 360° and tilt lengthwise from horizontal to near vertical and lock at any angle.
Heated Tops
The heated table tops aid in the prevention of heat loss during surgery and are available for both v-top and flat-top tables.
Heated coils located under the table provide even heat distribution. The temperature can be adjusted from 21° to 42° C (70° to 108°F) with the heating control box which easily mounts on a tie-down/restraint rod.
The total heating area measures 40.5 x 122 cm (16 x 48 in) on the v-top tables, 20 x 122 cm (8 x 48 in) for each panel, and measures
38 x 122 cm (15 x 48 in) on the flat-top tables. These tables are UL listed, CSA approved and CE marked.
Specifications59-952459-6830
Capacity English 12.5
Capacity Metric 11.9
Depth English 10
Depth Metric 25.4
Diameter English 7 7/8
Diameter Metric 20
MaterialSteelStainless Steel
Table Height Metric490 to 970490 to 970