Force Transducer (5 mg - 25 g)

Force Transducer (5 mg - 25 g)

Force Transducer (5 mg - 25 g)

Item# Description U.S. List Price Quantity
77-0118 Force Transducer (5 mg - 25 g), Model MLT0201
Login for U.S. Pricing
The MLT0201 Force Transducer is used for measuring forces under isometric conditions in the range of 5 mg to 25 g wt. The transducer is suitable for connection to all ADInstruments Bridge Amps. Operation: Mount the transducer by inserting the support rod through the hole on a micropositioner or clamp and connect it to an 8-pin DIN input on the front of a Bridge Amp. Take the thread tied to the tissue and attach it to the transducer by tying a loop around the cleft in the double plate on the end of the detecting rod which protrudes from the end of the transducer body. Using the micropositioner or clamp, adjust the tension in the thread to provide the desired amount of pre-load tension on the tissue. Application: The MLT0201 Force Transducer is ideal for isolated tissue studies and has been designed for operation with our range of organ bath models. (For use with Radnoti Organ Baths order the MLT0201/RAD).
Specifications77-0118
Amplification Input AmplifierSee product page for complete specifications
Body Diameter English1.2 in
Body Diameter Metric30 mm
Body Length English2.4 in
Body Length Metric60 mm
Bridge Resistance360 Ω
Cable Length English6.6 ft
Cable Length Metric2 m
Connector8-pin DIN
Displacement Range±0.45 mm
Excitation5 to 10 V DC
ModelMLT0201
Non linearity and Hysteresis<1 %
Operating Range5 mg to 25 g wt
Package1
Product FamilyData Acquisition
Resolution2 mg
Resonant Frequency140 Hz (Typical)
Sensitivity(full range) 30 mV/V
Support Rod Diameter Metric0.24 in
Support Rod Length Metric6.3 in
Weight170 g