ECG Measurement

ECG Measurement

ECG Measurement

Item# Description U.S. List Price Quantity
73-0149 Electrocardiogram (ECG) Amplifer Module (ECGA)
73-1643 Input Cable for Electrophysiological Signals
Login for U.S. Pricing
ECG Measurement
Specifications73-014973-1643
Analog IndicationSquare-wave signal generator with amplitudes of 0.3 mV and 1 mV 
Auto Zero106 dB 
ConnectorDIN 41612, 96-pin VG 
Electrical CalibrationBar graph 0.75 V/LED 
Filter Indicationby green LEDs on front panel 
Frequency RangeSwitch in Position x0.5 1000 to 5000 
GainSwitch in Position x1 2000 to 10000 
High-Pass FilterSwitch in Position x2 4000 to 20000 
Input(LOW CUT OFF) 5 Hz, 1 Hz, 0.5 Hz, 0.1 Hz 
Input Bias CurrentFloating differential input, isolated barrier internally clamped to 300 V, with protection against static discharges and 10 kHz input filter for h.f. suppression 
Input Capacity5-pin binder socket with screw lock; pin connections correspond to those of standard 3-pin ECG input cable 
Input Impedance1010? 
Low-Pass Filter(HIGH CUT OFF) 150 Hz, 120 Hz, 100 Hz, 50 Hz 
Manual ZeroBNC connector on front panel ( 
Notch Filter2 slot units 
PLUGSYS Width*5 V/600 mA, through connector from PLUGSYS bus system 
Power SupplyFor rapid discharge of coupling capacitors by pressing QUICK START key 
Quick StartInternal output is connected to bus system via jumpers; ECG signal is connected to recorder via Recorder Output Module (ROM); also possible to connect recorder directly to BNC connector 'ECG OUT' at front panel 
Signal Input 
Signal Output 
Transducer Supply