Dual Impedance Stimulator

Dual Impedance Stimulator

The 6000 Series of stimulators are ideal units for conducting teaching and research experiments. The range, which consists of the 6002 Basic Stimulator, 6012 Dual Pulse Stimulator and the 6020 Dual Impedance Stimulator, have been designed specifically to allow complete compatibility between all 6000 series stimulators.

Item# Description U.S. List Price Quantity
50-6020 Dual Impedance Stimulator
Login for U.S. Pricing
• Dual Output Impedance
• Sync Output
• 150 Volt Output Amplitude
• 9 Pulse Widths

The 6000 Series of stimulators are ideal units for conducting teaching and research experiments. The range, which consists of the 6002 Basic Stimulator, 6012 Dual Pulse Stimulator and the 6020 Dual Impedance Stimulator, have been designed specifically to allow complete compatibility between all 6000 series stimulators. This allows two or more systems to be connected together to make a sophisticated multi channel system.

All systems feature variable pulse frequency, 3 operating modes, variable pulse width, variable pulse amplitude, an output on or off selector, pulse indicator, gate in and gate out terminals. The 6012 and 6020 Stimulators also feature a sync output terminal. The 6020 stimulator featurers a delay circuit that allows the output pulse to be delayed in relation to the sync output for oscilloscope timebase to be pre-triggering. In continuous mode, systems generate a continuous stream of pulses, at the selected frequency, amplitude and pulse width. In single shot mode, a single pulse is generated at the selected amplitude and pulse width, whenever the single shot key is activated or when the gate in condition is met. In gate in mode, whenever the gate in condition is met or the single shot key is activated, pulses are produced at the selected frequency, amplitude and pulse width, for as long as the condition remains met. The 6020 Stimulator is similar to the 6012 stimulator, however there is no dual pulse function. Instead this unit has a fully earth isolated output amplitude of 150 Volts, which can be set at 100 ohms or 100 K Ohms impedance. The delay circuit allows the output pulse to be delayed in relation to the sync output.

Specifications50-6020
Connections2 x insulated 4 mm sockets (Output)
1 x uninsulated 4mm earth connection
3 x BNC socket (Gate & Sync Connections)
Dual Pulse Width0 to 1000 mS
Frequency Range0.1 to 1000 Hz in 4 ranges
Gate InShort Circuit or 12 Volt (Max) Logic Pulse (triggers on falling edge)
Model6020
Output Amplitude0 to 0.15 Volts, 0 to 5 Volts or 0 to 50 Volts
Power110-115 Volts 60 Hz or 220-230 Volts 50 Hz
Pulse Width Range0.1 to 50 mS in 9 preset steps
Rise and Fall Time> 5