Cage Incubator Temperature and Humidity Control

Cage Incubator Temperature and Humidity Control

The H201-T UNIT BL is the temperature controller used with the cage incubator, it includes the air heater and requires an Oko Touch for operation. Temperature precision is 0.1°C from 3°C above ambient to 40°C.

  • Filtered recirculation of heating air
  • Heating air diffusors
  • Temperature accuracy 0.1°C
  • Internal resolution 0.01°C
  • Operates in sample or enclosure feedback modes
  • Touch Screen Display
  • Web operation via optional Smart Box
  • SDK available for integration in third party software
  • Connects to the BL gas controllers through quick connector bus
  • 

We are the Authorized Distributor for Okolab products in the US.

 

 

Item# Description U.S. List Price Quantity
64-2103 (H201-T-UNIT-BL) Temperature contol unit - Bold Line. Operated by the OKO-Touch. Can be equipped with the Smart Box for data-logging, remote operation and remote support
64-2106 (H201-BC) Bubbling column. Humidifies the gas stream before the inlet into the chamber.
64-2007 (Oko-Touch) Touch screen display for Bold Line controllers
Login for U.S. Pricing

Okolab Air Heater with filter

Air Heater with filter

 

Temperature Controller - H201-T UNIT BL

The H201-T UNIT BL is the temperature controller used with the cage incubator, it includes the air heater and requires an Oko Touch for operation. Temperature precision is 0.1°C from 3°C above ambient to 40°C.

The controller maintains the air blown into the enclosure at the desired temperature, and recycles the heating air which enters into the enclosure through air diffusers. A on optional filter box can be attached to the heater unit to insure that the recycled air is dust and bacteria free.

 H201-T Okolab Temperature Controller

Filtering and Flow Control

The air heater has double inlets and outlets for recycling the heated air. The optional filtering unit attaches to one side of the heater unit and supplies HEPA level air filtering.

Flow rate and temperature sensors are continuously monitored and allow fast start-up and stable gradient free operation during the experiment. Air flow rate and temperature are set using the OKO Touch.

 Okolab Filtering and Flow Control

Feedback Control Modes

There are two ways to operate the system depending on which temperature sensor is used to provide feedback to the H201-T UNIT BL control unit.

In the specimen feedback mode, feedback is provided by a sensor placed inside the climate chamber near the specimen. Simple manipulation is required to attach the thermocouple into the reference well with adhesive tape.

In the enclosure feedback mode, the sensor measures the temperature of the air inside the enclosure.

 Feedback Control Modes
 

Humidity Module

Mixed gas is humidified by bubbling through a glass column containing distilled water. The bubbling column is placed inside the temperature controlled enclosure to saturate the gas stream at the same temperature as the specimen.

 Okolob Humidity Module


Cage Incubator System Arc

 Cage Incubator System Overview  Cate Incubator Cage  StageTop Temperature and Humidity Control Touch Smart Box and Air Pump  gas control selection
Cage Incubator
System Overview
Cage Incubator Cage Cage Incubator Stage
Climate Chamber
Touch, Smart Box,
and Air Pump
Gas Control
Selection

 

Specifications
DOCUMENT DESCRIPTION
OKOLAB brochure.pdfOkolab Brochure